Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
AKVATRON-3 — repair and waterproofing compound, grades L and T
AKVATRON

AKVATRON-3 — repair and waterproofing compound, grades L and T

Cementitious coating waterproofing

AKVATRON-3 is produced in two grades: pourable grade L is poured into formwork when repairing columns, beams, crossbars, roads and car parks, while thixotropic grade T is applied to walls and ceilings without formwork. Both grades are used for waterproofing and repair of bridge slabs and floor slabs, strengthening of foundations, monolithic sealing of stable joints, and in pools and tanks. The mix is non-shrink and free of metallic aggregates and chlorides; compressive strength is at least 30 MPa for grade L and 50 MPa for grade T, watertightness W14, frost resistance F300.

Specifications

ManufacturerAKVATRON — OOO “Akvatron-BKhK”, Biysk
Typecoating waterproofing
Usefoundations and basements, tanks and pools, bridge structures, leak repair
Basedry mortar mix with aggregate up to 5 mm, without metallic aggregates and chlorides; grade L — pourable, grade T — thixotropic
Colourgrey
Packagingpolyethylene film bags of 5 kg
Application methodgrade L — pouring into formwork in a layer of 5–80 mm (repair of columns, beams, crossbars, roads, airfields, car parks); grade T — vertical and overhead surfaces without formwork in a layer of 5–60 mm, patch repair of floors; both — waterproofing and repair of bridge slabs and floor slabs, strengthening and waterproofing of foundations, monolithic sealing of stable joints, pools and tanks; manual or machine application
Curingsetting: grade L — initial not earlier than 3 h 10 min, final not later than 11 h 30 min; grade T — 2 h 50 min / 10 h 10 min
Key propertiescompressive strength at least 30 MPa (L) / 50 MPa (T); flexural tensile strength at least 9 MPa; adhesion to concrete at least 1.5 MPa (L) / 2.0 MPa (T); watertightness at least W14; frost resistance at least F300; non-shrink; water 0.22–0.24 l/kg (L), 0.15–0.22 l/kg (T)
Layer thicknessgrade L 5–80 mm; grade T 5–60 mm
Shelf life24 months from the day of manufacture
StandardsGOST 31357

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by AKVATRON