Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
IZOLEP-mio — epoxy enamel with micaceous iron oxide, intermediate coat
VMP

IZOLEP-mio — epoxy enamel with micaceous iron oxide, intermediate coat

Epoxy enamels and coatings

A high-build epoxy enamel on an aliphatic polyamine hardener, pigmented with micaceous iron oxide, with a semi-matt grey or mustard surface. In a system it is the intermediate coat between TSINEP, TSVES, IZOLEP-primer primers and POLITON-UR topcoat enamels; where there is no intense solar radiation it can also be the topcoat. It is suitable for bridges, oil and gas, marine, chemical and power facilities in all macroclimatic regions (from −60 °C), withstands spills of petroleum products, solutions of salts, acids and alkalis, and is applied down to −10 °C.

Specifications

ManufacturerVMP — AO “NPKh VMP”, Yekaterinburg
Typeepoxy enamels and coatings
Usesteel structures, bridges, oil and gas, marine and port structures, chemical plants, power industry
Baseepoxy, two-pack, hardener — aliphatic polyamine resin; pigment micaceous iron oxide; high-build
Colourgrey or mustard (shade not standardised); semi-matt
Packagingkit: base in metal pails, hardener in metal cans (depending on the kit weight)
Application methodairless spray (nozzle 0.015–0.021″, 10–15 MPa), air spray, brush, roller; base : hardener 5.2:1 by weight, 3:1 by volume; solvent SOLV-EP up to 10 % by weight
Application temperatureair from −10 to +40 °C, relative humidity up to 85 %
Dryingto degree 3 — no more than 3 h at 20 °C; at +20 °C: tack-free 2 h, minimum before overcoating 4 h, before handling 5 h, before stacking and shipment 10 h, full cure 7 days (schedules for temperatures from −10 to +40 °C: at −10 °C — 70 h before overcoating, 60 days full cure); maximum before overcoating — 6 months; holding time of primers before applying IZOLEP-mio at 20 °C: TSINEP 4 h, IZOLEP-primer 2 h, TSVES 6 h, IZOLEP-mio 3 h, others 24 h; pot life 1.5 h at +20 °C
Key propertiesvolume solids — 71±2.0 %, non-volatile matter by weight — 84±2.0 %, density — 1.50±0.05 g/cm³, adhesion (GOST 31149) — max. 1 point, heat resistance in a dry atmosphere — +120 °C continuously, +150 °C short-term, coating class — V, service in all macroclimatic regions (from −60 °C); withstands spills of crude oil and petroleum products, solutions of salts, acids and alkalis; water-resistant
Compatible materialsprimers TSINEP, IZOLEP-primer, TSVES, other epoxy or silicone primers; topcoat enamels POLITON-UR (UV), POLITON-UR, other polyurethane and epoxy enamels; compatible with IZOLEP-mastic
Shelf life24 months
StandardsTU 2312-050-12288779-2005; GOST 9.401-2018; RD GM-02-18 (Trust “Gidromontazh”); STO-01393674-007-2022 (AO “TsNIITS”); STO 12288779-001-2020 (SC Avtodor); JSC RZD accreditation; complies with the normative documents (ND) of Gazprom (offshore structures), Rosneft, Lukoil; MMC Norilsk Nickel

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by VMP