Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
IZOLEP primer-enamel — epoxy primer-enamel with zinc phosphate for shop application
VMP

IZOLEP primer-enamel — epoxy primer-enamel with zinc phosphate for shop application

Primer-enamels

A high-build fast-drying primer-enamel on a modified epoxy resin with an amine hardener; the anticorrosive pigment is zinc phosphate with an organic corrosion inhibitor. The material is particularly suitable for shop painting of steel structures: it is the primer coat under POLITON-UR (UV) and VINIKOR-62 enamels and PLAMCOR fire-retardant compounds, and in an open industrial atmosphere and indoors it is a stand-alone coating. It is applied at air temperatures from −10 °C, tolerates hand cleaning to St 2 and withstands +120 °C continuously in a dry atmosphere.

Specifications

ManufacturerVMP — AO “NPKh VMP”, Yekaterinburg
Typeprimer-enamels
Usesteel structures
Basemodified epoxy resin, two-pack, amine-type hardener; anticorrosive pigment zinc phosphate with an organic corrosion inhibitor; high solids
Colourto the manufacturer’s multicolour colour card; matt
Packagingkit: base and hardener in metal pails (depending on the kit weight)
Application methodairless spray (nozzle 0.013–0.021″, at least 15 MPa), air spray, brush, roller; base : hardener 3:1 by volume; thinner SOLV-EP up to 3 % (airless), up to 7 % (air spray), up to 5 % (brush, roller) by weight
Application temperatureair from −10 to +40 °C, relative humidity max. 85 %; temperature of the primer-enamel during application at least +15 °C
Dryingto degree 3 — no more than 3 h at 20 °C; at +20 °C: tack-free and minimum before overcoating 3 h, before handling 8 h, before stacking and shipment 12 h, full cure 7 days (schedules for temperatures from 0 to +25 °C: at 0 °C — 16 h before overcoating, 20 days full cure); maximum before overcoating: IZOLEP — 6 months, POLITON-UR (UV) — 8 months; pot life 2 h at +20 °C (4 h at +10 °C, 1 h at +30 °C)
Key propertiesnon-volatile matter by weight — 81±2 %, volume solids (average) — 71±2 %, density — 1.50±0.05 g/cm³, cross-cut adhesion (GOST 31149) — max. 1 point, pull-off adhesion (GOST 32299) — at least 5.0 MPa, heat resistance in a dry atmosphere — +120 °C continuously, +150 °C short-term
Compatible materialsprimer coat under POLITON-UR (UV), VINIKOR-62, PLAMCOR fire-retardant compounds, acrylic, polyurethane and other based enamels; stand-alone coating in an open industrial atmosphere and indoors
Shelf life24 months from the date of manufacture
StandardsTU 20.30.12-151-12288779-2024; state registration certificate No. RU.66.01.40.008.E.000031.07.24 of 25.07.2024; approved by IPKhiS Frishberg

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by VMP