Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
VINIKOR BEP-5297 — epoxy enamel for containers with drinking water and food products
VMP

VINIKOR BEP-5297 — epoxy enamel for containers with drinking water and food products

Tank coatings

An epoxy enamel for the internal surfaces of tanks, tank cars, silos and containers in which drinking water and food products are stored. The coating permits contact with drinking water and products — cereals, sugar, flour, beer, wine, juices, vegetable oil, fat-containing products — at temperatures up to +60 °C; for direct contact with food, white enamel is used. The material has test reports from the testing centre of FBUZ “Centre for Hygiene and Epidemiology in the City of Moscow” and an expert opinion; it is applied over steel and concrete and is suitable for walls, floors and columns under sanitary and epidemiological control.

Specifications

ManufacturerVMP — AO “NPKh VMP”, Yekaterinburg
Typetank coatings
Usetanks, steel structures, concrete
Baseepoxy resin with pigments and fillers, amine hardener; two-pack; supplied at working viscosity
Colourwhite, blue, grey and others by agreement; semi-gloss
Packagingkit: base and hardener in metal pails
Application methodairless spray without thinning (nozzle 0.017–0.021″, 18–22 MPa), brush; 1–2 coats; base:hardener 100:26 by weight; on concrete — an impregnating coat of the same enamel with SOLVIN-13 max. 10 % by weight
Application temperaturefrom +5 to +30 °C, relative humidity max. 80 %; surface at least 3 °C above the dew point; temperature of the prepared enamel not below +15 °C
Dryingto degree 3 — no more than 16 h at 20 °C; overcoating — not earlier than 24 h at 20 °C; impregnating coat on concrete — at least 16 h; before washing prior to contact with drinking water and food products — at least 7 days at temperatures above 20 °C, 15 days at 15–19 °C, 25 days below 15 °C
Key propertiesvolume solids — 89±2 %, density — 1.3–1.7 g/cm³, pot life at 20 °C — at least 40 min, contact with drinking water and food products (cereals, sugar, flour, beer, wine, juices, vegetable oil, fat-containing products) at temperatures up to +60 °C, for direct contact with food products white enamel is used
Compatible materialsstand-alone coating over steel and concrete (on concrete — with an impregnating coat of the same enamel)
Shelf lifebase and hardener — 12 months from the date of manufacture
StandardsTU 20.30.12-012-67503963-2018; state registration certificate RU.77.01.34.008.E.003260.12.21; test reports of the testing centre of FBUZ “Centre for Hygiene and Epidemiology in the City of Moscow” No. 8221 12 of 03.07.2018 and No. 38-4436 of 31.05.2018; expert opinion No. 77.01.12.P.001998.07.18 of 09.07.2018; RS type approval certificate No. 26.44.01.00495.120

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by VMP