ALPOL — aluminium finish for the TSINOL cold galvanising system
Protective and decorative silver coat over TSINOL and TSINOL-SV for construction, road and power facilities, applied down to −25 °C.

A two-pack epoxy primer-enamel with corrosion inhibitors, included in GOST 7409-2018. Its main field of application is freight wagons outside and inside, including for non-food bulk cargoes and mineral fertilisers, railway infrastructure (except railway bridges) and other steel structures in aggressive environments. It is applied over tightly adhering rust and old coatings at temperatures from −10 °C; it works on its own or is overcoated with VINIKOR-62, POLITON-UR (UV), VINIKOR-akril-51 and other enamels.
| Manufacturer | VMP — AO “NPKh VMP”, Yekaterinburg |
|---|---|
| Type | primer-enamels |
| Use | steel structures |
| Base | epoxy resin and amine hardener, two-pack; contains corrosion inhibitors |
| Colour | red-brown, blue, green, beige, grey, black and others |
| Packaging | kit: base in metal pails, hardener in metal cans |
| Application method | airless spray without thinning (nozzle 0.015–0.021″, 15–21 MPa), air spray, brush, roller; 1–2 coats; base:hardener 100:7.5 by weight; thinner SOLVIN-12 up to 8 % by weight; induction time after mixing 15–20 min |
| Application temperature | from −10 to +35 °C (from +5 to +35 °C recommended for freight rolling stock), relative humidity max. 85 %; surface at least 3 °C above the dew point but not above +40 °C |
| Drying | drying schedules are given for temperatures from −5 to +35 °C |
| Key properties | density — 1.4±0.1 g/cm³, pot life at 20 °C — at least 8 h, volume solids — 62±2 %, non-volatile matter by weight — 77.5±1.5 % |
| Compatible materials | stand-alone coating; if necessary overcoated with VINIKOR-62, POLITON-UR (UV) enamels, VINIKOR, VINIKOR-akril-51 primer-enamels and other epoxy-vinyl, epoxy, acrylate, polyurethane materials |
| Shelf life | base — 24 months, hardener — 12 months from the date of manufacture |
| Standards | TU 20.30.12-010-67503963-2017; state registration certificate RU.77.01.34.008.E.003234.12.21; included in GOST 7409-2018; conclusion of AO “VNIIZhT” No. 3389 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Protective and decorative silver coat over TSINOL and TSINOL-SV for construction, road and power facilities, applied down to −25 °C.
Thixotropic epoxy primer for the internal surfaces of tanks, tank cars and pipelines, working in a system with NEFTEKOR enamel.
Epoxy intumescent compound for fire protection of steel structures in a cellulosic fire, including in the open industrial atmosphere.
Fast-drying epoxy coating with zinc phosphate for painting steel structures and equipment on automatic lines.
Epoxy syntactic foam — a thermal insulation layer of combined steel fire protection that works only together with intumescent PLAMCOR products.
Epoxy primer-enamel with 95 % solids for the underwater hull of icebreakers, berths and locks; service down to −70 °C.