VINIKOR BEP-5297 — epoxy enamel for containers with drinking water and food products
Epoxy enamel for tanks, silos and containers: permits contact with drinking water and food products at temperatures up to +60 °C.

An acrylic primer-enamel combining primer and enamel in one coat: it is applied directly to metal and immediately forms a UV-resistant coating in a colour from the RAL catalogue. It is suitable for new and repaired steel structures, bridges and power facilities in all macroclimatic regions per GOST 15150 and is applied at temperatures down to −5 °C. It works on its own or as a finish coat over VINIKOR-marin, VINIKOR-ecoprime, IZOLEP-primer, IZOLEP-mastic and IZOLEP-235 primers and primer-enamels.
| Manufacturer | VMP — AO “NPKh VMP”, Yekaterinburg |
|---|---|
| Type | primer-enamels |
| Use | steel structures, bridges, power industry |
| Base | polyacrylic resins with anticorrosive pigments, one-component; applied directly to metal (DTM); UV-resistant |
| Colour | to the RAL catalogue |
| Packaging | metal pails |
| Application method | airless spray (nozzle 0.015–0.021″, 15–22 MPa), air spray, brush, roller; 1–2 coats; thinners SOLVIN-15, xylene, toluene up to 10 % by weight |
| Application temperature | from −5 to +35 °C, relative humidity max. 85 %; surface at least 3 °C above the dew point |
| Drying | to degree 3 — no more than 3 h at 20 °C; drying between coats — at least 1 h at +20 °C |
| Key properties | density — 1.25±0.25 g/cm³, volume solids — 37±2 %, non-volatile matter by weight — 51±4 %, service in atmospheric conditions of all macroclimatic regions per GOST 15150 |
| Compatible materials | stand-alone coating; finish coat over VINIKOR-marin primer and enamel, VINIKOR-ecoprime, IZOLEP-primer, over IZOLEP-mastic and IZOLEP-235 primer-enamels and other epoxy materials |
| Shelf life | 24 months from the date of manufacture |
| Standards | TU 20.30.12-015-67503963-2018; state registration certificate RU.77.01.34.008.E.003251.12.21; Russian River Register certificate ROSS RU.RO00.N00432 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Epoxy enamel for tanks, silos and containers: permits contact with drinking water and food products at temperatures up to +60 °C.
Epoxy pre-fabrication primer for rolled steel plate: protection up to 24 months, allows high-speed welding and thermal cutting.
One-component direct-to-metal primer-enamel for ships, railway wagons and steel structures; applied in frost down to −25 °C.
Fast-drying epoxy shop primer for factory painting of metal: degree 3 in 10 min, allows thermal cutting and welding.
Gloss epoxy urethane coating with 90 % solids for metal and reinforced concrete in an industrial atmosphere without ultraviolet.
The finish coat of the NEFTEKOR system for tanks, tank cars and pipelines, resistant to crude oil, fuels and bottom water.