Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
NEFTEKOR enamel — epoxy enamel for the internal surfaces of tanks
VMP

NEFTEKOR enamel — epoxy enamel for the internal surfaces of tanks

Tank coatings

NEFTEKOR enamel is applied over NEFTEKOR primer to the internal surfaces of steel storage tanks, containers, tank cars and process pipelines. The two-pack thixotropic epoxy material with a low organic solvent content is produced in white, grey, light green and black. White enamel over orange primer forms a system for light petroleum products, including aviation fuel; the system with NEFTEKOR primer is approved by VNIIST and FSUE GosNIIGA. The coating is resistant to crude oil, diesel fuel, kerosene, fuel oil and alkali solutions and operates from −60 to +60 °C.

Specifications

ManufacturerVMP — AO “NPKh VMP”, Yekaterinburg
Typetank coatings
Baseepoxy, two-pack, thixotropic, with a low organic solvent content
Colourwhite, grey, light green, black; gloss
Packagingkit: base in metal pails, hardener in metal cans
Application methodairless spray (nozzle 0.015–0.021″, 15–22 MPa), brush, roller; 1–2 coats; thinner SOLVIN-12 up to 5 % by weight
Application temperaturewhite — from +5 to +35 °C, other colours — from −5 to +35 °C; relative humidity max. 85 %; surface at least 3 °C above the dew point; temperature of the prepared enamel not below +15 °C
Dryingto degree 3 — no more than 24 h at 20 °C; drying between coats — at least 24 h at +20 °C; before service of the system in aggressive media — at least 7 days at +20 °C
Key propertiesdensity — 1.4±0.1 g/cm³, pot life at 20 °C — at least 6 h, volume solids — 71±3 %, non-volatile matter by weight — 82.5±2.5 %, resistance to crude oil, aviation and automotive fuels, lubricating oils, diesel fuel, kerosene, fuel oil, fresh, sea and bottom water, alkali solutions; short-term — to acid solutions, service temperature — from −60 to +60 °C
Compatible materialsover NEFTEKOR primer; for light petroleum products (aviation fuel) — white enamel over orange NEFTEKOR primer
Shelf lifebase — 24 months from the date of manufacture; the shelf life of the hardener is stated in the quality certificate
StandardsTU 20.30.12-006-23394220-2018; state registration certificate RU.77.01.34.008.E.003235.12.21; approved by VNIIST and FSUE GosNIIGA (in a system with NEFTEKOR primer); the system is included in the “Technical Specifications for Protective Coatings” of AO “Mondi SLPK”

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by VMP