Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
IZOLEP-epolain — epoxy urethane coating for metal and concrete
VMP

IZOLEP-epolain — epoxy urethane coating for metal and concrete

Epoxy enamels and coatings

The two-pack epoxy urethane composition with high solids — 90 % by volume — forms a gloss coating resistant to mechanical wear and abrasion. It protects metal, reinforced concrete and other mineral surfaces against gases, aqueous salt solutions and short-term splashing with acids, alkalis, crude oil and petroleum products. It is designed for an industrial atmosphere without ultraviolet radiation and is therefore not used on surfaces in direct sunlight; concrete is cured for at least 28 days before painting, and the coating dries for at least 7 days before service in aggressive conditions.

Specifications

ManufacturerVMP — AO “NPKh VMP”, Yekaterinburg
Typeepoxy enamels and coatings
Usesteel structures, concrete
Baseepoxy urethane composition, two-pack (base and hardener); high solids
Colourwhite, grey, red-brown, black, other colours by agreement with the customer; gloss
Packagingkit: base in metal pails, hardener in metal cans (depending on the kit weight)
Application methodairless spray (nozzle 0.015–0.021″, 15–22 MPa) and air spray — 1–2 coats; brush, roller — 2–3 coats; thinner SOLVIN-15: 5–10 % (airless), up to 10 % (air spray, brush, roller) by weight
Application temperaturefrom +5 to +35 °C, relative humidity max. 80 %; surface at least 3 °C above the dew point
Dryingto degree 3 — no more than 18 h at 20 °C; drying between coats at +20 °C — at least 16 h; before service in aggressive conditions — at least 7 days at 20 °C; pot life at least 40 min at 20 °C
Key propertiesvolume solids — 90±2 %, non-volatile matter by weight — at least 95 %, density — 1.6–1.9 g/cm³, resistance to gases, aqueous salt solutions, short-term splashing with acids, alkalis, crude oil and petroleum products, mechanical wear and abrasion, service in an industrial atmosphere without UV radiation
Shelf life12 months
StandardsTU 20.30.12-018-67503963-2019; state registration certificate No. RU.77.01.34.008.E.003241.12.21 of 20.12.2021

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by VMP