TSINOL-SV — zinc-rich compound for structures subject to resistance welding
Cold galvanising compound for welded rolling-stock structures: allows resistance welding through a single coat without impairing the weld.

An antistatic epoxy coating for the internal surface of storage tanks, containers, tank cars and process pipelines where light petroleum products and aviation fuel are stored and pumped. An additive that increases electrical conductivity provides a volume resistivity of no more than 10⁹ Ω·m, so the coating does not accumulate static charge. It is resistant to petrol, aviation and diesel fuel, gas oils, white spirit, liquefied natural gas and sea water; it is approved by FSUE GosNIIGA, and the predicted service life is 20 years.
| Manufacturer | VMP — AO “NPKh VMP”, Yekaterinburg |
|---|---|
| Type | tank coatings |
| Base | epoxy, two-pack, amine hardener; antistatic (additive to increase electrical conductivity); abrasion-resistant |
| Colour | black, grey |
| Packaging | kit: base in metal pails, hardener in metal cans |
| Application method | airless spray (nozzle 0.015–0.021″, 15–25 MPa), air spray, brush, roller; thinner SOLV-EP max. 5 % by weight (recommended at +30…+40 °C); base : hardener 6.5:1 by weight, 5:1 by volume |
| Application temperature | application and curing at air temperatures from +5 to +40 °C, relative humidity max. 80 %; surface at least 3 °C above the dew point but not above +40 °C; material not below +15 °C |
| Drying | at 23 °C, max.: to degree 1 — 5 h, to degree 3 — 8 h; pot life 2 h at +20 °C (3.5 h at +15 °C, 1 h at +30 °C) |
| Key properties | average volume solids — 57 %, non-volatile matter by weight — 65–70 %, density — 1.15–1.25 g/cm³, volume resistivity — max. 10⁹ Ω·m (the coating does not accumulate static charge), reinforced-type coating with a predicted service life of 20 years (NII Transneft), service temperature in liquid media — up to +60 °C (short-term up to +75 °C), withstands steaming, resistance to light petroleum products (petrol, aviation and diesel fuel, gas oils, gas condensate distillate, white spirit, solvent, nefras), liquefied natural gas, sea water, metalworking fluids and cleaning liquids |
| Compatible materials | stand-alone coating; at PJSC Transneft facilities the first coat is grey, the second black; compatible with IZOLEP-oil 250 |
| Shelf life | 24 months from the date of manufacture |
| Standards | TU 20.30.12-081-12288779-2017; complies with the normative documents (ND) of Gazprom, Transneft, Rosneft, Lukoil, Irkutsk Oil Company, Surgutneftegas, Gazprom Neft; approved by NII Transneft, FSUE GosNIIGA; state registration certificate No. RU.66.01.40.015.E.000110.08.17 of 24.08.2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Cold galvanising compound for welded rolling-stock structures: allows resistance welding through a single coat without impairing the weld.
Acrylic primer-enamel for steel structures, bridges and power facilities; UV-resistant, applied down to −5 °C.
Vinyl-epoxy finish enamel in RAL colours for bridges, steel structures and concrete; dark shades are applied down to −10 °C.
The finish coat of the IZOLEP-WP waterproofing system for bridge superstructure slabs: a polyurethane enamel resistant to weathering and ultraviolet.
One-pack intumescent paint based on acrylic copolymers for fire protection of steel structures indoors and under a canopy.
Epoxy primer-enamel for berths, tanks and water conduits: applied to damp surfaces, cures under water, Im1–Im3 per ISO 12944.