TSINEP 80 — epoxy zinc-rich primer, level 2 per SSPC Paint 20
A version of TSINEP with at least 80 % zinc — the primer coat of epoxy and polyurethane systems for steel structures and bridges.

PLAMCOR-2 is a solvent-borne intumescent paint based on acrylic copolymers; it is supplied in a single pack and requires no mixing of components. It is intended for steel structures in heated and unheated premises and under a canopy (placement categories 2, 3, 4 per GOST 15150). The coating is not water-resistant: outdoors it may be left only for the construction period, for no more than two years and under a finish enamel. It is applied at temperatures from −25 to +40 °C, including at sub-zero temperatures.
| Manufacturer | VMP — AO “NPKh VMP”, Yekaterinburg |
|---|---|
| Application | steel structures |
| Service conditions | placement categories 2, 3, 4 per GOST 15150 (under a canopy, in unheated and heated premises); outdoors — only for the construction period, no more than 2 years, when overcoated with a finish enamel; the coating is not water-resistant |
| Base | acrylic copolymers, solvent-borne, one-pack, intumescent |
| Colour | white to light grey (shade not standardised) |
| Packaging | tin buckets |
| Application method | airless spray (nozzle 0.019–0.031″, ≥20 MPa), brush |
| Application temperature | from −25 to +40 °C, relative humidity ≤ 80 % |
| Drying | to degree 3 — no more than 3 h at 20 °C; before overcoating with enamel — at least 24 h; full drying — at least 10 days at 20 °C |
| Compatible primers and topcoats | enamels POLITON-UR (UV), EVOPOL-12, PF-115, etc. (polyurethane, vinyl-epoxy, vinyl, chlorinated vinyl, alkyd); primers TSINEP, IZOLEP-primer, IZOLEP-mastic, IZOLEP, VINIKOR-061, VINIKOR-ecoprime-01, EVOPOL-12, GF-021 |
| Shelf life | 24 months |
| Standards | TU 2313-074-12288779-2008; GOST 15150; GOST 9980.5; GOST 19007; EAEU certificates of conformity (incl. EAEU KZ) and NSOPB certificates |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
A version of TSINEP with at least 80 % zinc — the primer coat of epoxy and polyurethane systems for steel structures and bridges.
Epoxy primer-enamel for steel structures: a primer under POLITON-UR (UV) and PLAMCOR fire protection, overcoatable after just 3 h at +20 °C.
Water-dispersion intumescent paint for fire protection of steel structures indoors: vinyl acetate base, performance of 45, 60 and 90 minutes.
Low-solvent epoxy enamel for ship hulls and hydraulic structures; finish or intermediate coat.
Moisture-curing enamel with micaceous iron oxide — an intermediate coat over zinc primers for bridges, oil and gas, chemical plants and hydraulic structures.
Gloss epoxy urethane coating with 90 % solids for metal and reinforced concrete in an industrial atmosphere without ultraviolet.