Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
VINIKOR-marin enamel — thixotropic epoxy enamel for ships and hydraulic structures
VMP

VINIKOR-marin enamel — thixotropic epoxy enamel for ships and hydraulic structures

Epoxy enamels and coatings

The partner of VINIKOR-marin primer is a thixotropic epoxy enamel with a low organic solvent content and solids of about 72 % by volume. It protects the underwater and above-water parts of ships, the variable waterline zone and hydraulic structures, and withstands sea and fresh water, crude oil and petroleum products with temperature changes from −50 to +60 °C. It can be a finish coating or an intermediate coat under antifouling enamels, VINIKOR-62 and POLITON-UR (UV); under intense ultraviolet the surface chalks.

Specifications

ManufacturerVMP — AO “NPKh VMP”, Yekaterinburg
Typeepoxy enamels and coatings
Usesteel structures, marine and port structures
Baseepoxy, two-pack, thixotropic, with a low organic solvent content
Colourgrey, black, red-brown and others by agreement; semi-gloss
Packagingkit: base in metal pails, hardener in metal cans
Application methodairless spray (nozzle 0.015–0.021″, 15–21 MPa), air spray, brush, roller; 1–2 coats; base to hardener ratio — as per the label and quality certificate; thinners SOLVIN-12, SOLVIN-15 up to 15 % by weight; induction time after mixing 15–20 min
Application temperaturefrom +5 to +35 °C (from −5 °C permitted), relative humidity max. 85 %; surface at least 3 °C above the dew point; temperature of the prepared enamel not below +15 °C
Dryingdrying schedules are given for temperatures from −5 to +35 °C
Key propertiesdensity — 1.4±0.1 g/cm³, pot life at 20 °C — at least 4 h, volume solids — 72±2 %, non-volatile matter by weight — 82.5±2.5 %, resistance to sea and fresh water, crude oil, petroleum products; temperature changes from −50 to +60 °C, under intense UV radiation the coating chalks
Compatible materialsover VINIKOR-marin primer; intermediate coat under antifouling enamels, VINIKOR-62, POLITON-UR (UV), VINIKOR, VINIKOR-akril-51, VINIKOR-nord primer-enamels, EP-46U, KhS-436; finish coating
Shelf lifebase — 24 months from the date of manufacture; the shelf life of the hardener is stated in the quality certificate
StandardsTU 20.30.12-004-67503963-2018; state registration certificate RU.77.01.34.008.E.003249.12.21; conclusions of NRC “Kurchatov Institute” – TsNII KM “Prometey”, decision of Section No. 5 of the MVK (shipbuilding and ship repair); Russian River Register certificate ROSS RU.RO00.N00432

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by VMP