VMP
VINIKOR BEP-5297 — epoxy enamel for containers with drinking water and food products
Epoxy enamel for tanks, silos and containers: permits contact with drinking water and food products at temperatures up to +60 °C.
Price on request
VMP
IZOLEP-pro — penetrating epoxy primer for concrete
A colourless epoxy resin solution with adhesion promoters that penetrates the surface layer of concrete and strengthens it; on its own it can serve as a dust-proofing coating. Its main role is a primer on concrete under IZOLEP-mastic, IZOLEP-gidro, IZOLEP-mio, VINIKOR-62, EVOPOL-12 and polyurethane enamels, as well as a tie intermediate coat, for example in the IZOLEP-arktik + POLITON-UR (UV) system, and an adhesion layer under polyurethane sealants. It works in the atmosphere, under full immersion and in the variable level zone; it is applied to concrete at least 28 days old.
Specifications
| Manufacturer | VMP — AO “NPKh VMP”, Yekaterinburg |
|---|---|
| Type | epoxy primers |
| Use | concrete, bridges |
| Base | epoxy resin solution with adhesion promoters, two-pack, polyamide-type hardener; penetrating |
| Colour | colourless; uniform matt coating |
| Packaging | kit: base — metal pails 20 l, hardener — metal pails 3 l |
| Application method | airless spray without thinning (nozzle 0.013–0.015″, 10–15 MPa), air spray, brush (thinner SOLV-EP up to 5 % by weight); roller not recommended; base : hardener 100:19 by weight; in a thin coat, the primed surface must not be glossy |
| Application temperature | from +10 to +35 °C, relative humidity max. 80 %; substrate at least 3 °C above the dew point; concrete at least 28 days old, moisture of the 20 mm surface layer max. 4 % |
| Drying | at 23 °C and humidity 65 %: tack-free 4 h, dry to touch and before applying the next coat 6 h; pot life at least 8 h at 20 °C |
| Key properties | non-volatile matter by weight — 30.0–34.0 %, volume solids — 28.0–30.0 %, density — 0.9–1.0 g/cm³, service in the atmosphere and in contact with liquid media, in full immersion and variable level zones |
| Compatible materials | primer coat under IZOLEP-mastic, IZOLEP-gidro, IZOLEP-mio, POLITON-UR, VINIKOR-62, EVOPOL-12 and other epoxy, vinyl-epoxy, polyurethane enamels; tie intermediate coat; adhesion layer under polyurethane sealants |
| Shelf life | 36 months from the date of manufacture |
| Standards | TU 20.30.22-124-12288779-2019; STO-01393674-008-2024 (AO TsNIITS); state registration certificate No. RU.66.01.40.015.E.000188.12.20 of 29.12.2020 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by VMP
VMP
ALPOL — aluminium finish for the TSINOL cold galvanising system
Protective and decorative silver coat over TSINOL and TSINOL-SV for construction, road and power facilities, applied down to −25 °C.
Price on request
VMP
VINIKOR-akril-51 — one-component acrylic direct-to-metal primer-enamel
Acrylic primer-enamel for steel structures, bridges and power facilities; UV-resistant, applied down to −5 °C.
Price on request
VMP
IZOLEP-oil — epoxy coating for the internal surfaces of oil tanks
High-build epoxy coating for tanks and pipelines with crude oil, fuel oil and bottom water; predicted service life 20 years.
Price on request
VMP
TSVES-MO — zinc silicate primer for hot surfaces up to +400 °C
Moisture-curing zinc silicate primer for furnaces, boilers and heated pipelines, including those operating under thermal insulation.
Price on request
VMP
VINIKOR-ecoprime-01 — high-build epoxy primer with corrosion inhibitor
Epoxy primer for steel, aluminium, fibreglass and concrete in chemical plants and shipbuilding; applied down to −10 °C.
Price on request