Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
VINIKOR-62 (grade A) — vinyl-epoxy enamel for metal and concrete
VMP

VINIKOR-62 (grade A) — vinyl-epoxy enamel for metal and concrete

Epoxy enamels and coatings

Grade A of VINIKOR-62 enamel is intended for metal, concrete and reinforced concrete — bridges, steel structures and power facilities. The matt vinyl-epoxy coating in a colour from the RAL catalogue is oil- and petrol-resistant and withstands splashes of petroleum products, sea and fresh water and temperature changes from −60 to +60 °C. It serves as a finish coat over VINIKOR-061, VINIKOR-marin, TSINEP, TSINOTAN, TSINOL primers, and on concrete over VINIKOR-63 varnish; dark shades are applied down to −10 °C, light shades down to −5 °C.

Specifications

ManufacturerVMP — AO “NPKh VMP”, Yekaterinburg
Typeepoxy enamels and coatings
Usesteel structures, bridges, power industry, concrete
Basevinyl-epoxy, two-pack
Colourto the RAL catalogue, matt uniform
Packagingkit: base in metal pails, hardener in metal cans
Application methodairless spray (nozzle 0.015–0.019″, 15–22 MPa), air spray, brush, roller; 1–3 coats; base:hardener 100:2.9 by weight; thinners SOLVIN-10, SOLVIN-15 up to 5 % (by weight)
Application temperaturefrom −10 to +35 °C for dark shades, from −5 to +35 °C for light shades; relative humidity max. 85 %; surface at least 3 °C above the dew point; temperature of the prepared enamel not below +15 °C
Dryingat 20 °C: to degree 3 — 3 h, overcoating — not earlier than 3 h, full cure — 7 days; drying schedules are given for temperatures from +5 to +40 °C
Key propertiesdensity — 1.1±0.1 g/cm³, pot life at 20 °C — at least 24 h, volume solids — 33±2 %, non-volatile matter by weight — 39–45 %, oil- and petrol-resistant; resistant to splashes of crude oil and petroleum products, sea and fresh water, short-term to hot water and steam, sharp temperature changes — from −60 to +60 °C
Compatible materialsfinish coat over VINIKOR-061, VINIKOR-marin, VINIKOR-ecoprime-01, TSINEP, TSINOTAN, TSINOL primers, over VINIKOR-ecoprime primer-enamel, over VINIKOR-63 varnish (concrete) and other vinyl-epoxy and epoxy primers
Shelf lifebase — 24 months, hardener — 12 months from the date of manufacture
StandardsTU 20.30.12-001-54359536-2018; state registration certificate RU.78.01.10.008.E.000705.12.21; STO-0139367-007-2022 and STO-01393674-008-2024 (AO “TsNIITS”); STO 12288779-001-2020 (SC Avtodor); approved by VNIIST, TsNIIPSK named after Melnikov, NII LKP with OMZ “Viktoriya”, VNII Neftekhim, VNIIZhT, AO “TsNIIS”, FSUE “NITI named after A. P. Aleksandrov”

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by VMP