VINIKOR-ecoprime-01 — high-build epoxy primer with corrosion inhibitor
Epoxy primer for steel, aluminium, fibreglass and concrete in chemical plants and shipbuilding; applied down to −10 °C.

A one-pack conventional antifouling enamel on a blend of synthetic resins, without tin-containing organic compounds; it has been issued a type approval certificate of the Russian Maritime Register of Shipping. The enamel is designed for low- and medium-speed ships with long lay-ups, as well as for fixed structures. It is applied in 1–2 coats as a finish coating over VINIKOR-marin materials, VINIKOR primer-enamel and other epoxy primers, including at sub-zero temperatures — from −5 °C.
| Manufacturer | VMP — AO “NPKh VMP”, Yekaterinburg |
|---|---|
| Type | anticorrosive material |
| Use | marine and port structures |
| Base | blend of synthetic resins, antifouling, tin-free, one-pack |
| Colour | red-brown, brown, black, blue (shade not standardised); uniform matt |
| Packaging | metal pails or metal cans |
| Application method | airless spray (nozzle 0.015–0.021″, 15–22 MPa), air spray, brush, roller; 1–2 coats; thinner SOLVIN-15 up to 10 % by weight |
| Application temperature | from −5 to +35 °C, relative humidity max. 85 %; surface at least 3 °C above the dew point; temperature of the prepared enamel not below +15 °C |
| Drying | to degree 3 — no more than 3 h at 20 °C (per the drying schedules at +20 °C — 4 h); drying schedules are given for temperatures from −5 to +35 °C |
| Key properties | density — 1.85±0.25 g/cm³, volume solids — 50±3 %, non-volatile matter by weight — 75±5 %, conventional antifouling system without tin-containing organic compounds (RS) |
| Compatible materials | finish coat over VINIKOR-marin materials, VINIKOR primer-enamel and other epoxy primers and primer-enamels |
| Shelf life | 24 months from the date of manufacture |
| Standards | TU 20.30.12-020-67503963-2019; state registration certificate RU.77.01.34.008.E.003248.12.21; RS type approval certificate No. 25.44.01.09893.120; Russian River Register certificate ROSS RU.RO00.N00432 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Epoxy primer for steel, aluminium, fibreglass and concrete in chemical plants and shipbuilding; applied down to −10 °C.
Acrylic primer-enamel for steel structures, bridges and power facilities; UV-resistant, applied down to −5 °C.
Powder material for pipe plants, sprayed as a second layer over uncured VM-6233R onto a heated pipe.
Low-solvent epoxy enamel for ship hulls and hydraulic structures; finish or intermediate coat.
Seamless elastic waterproofing membrane for bridge and overpass slabs; withstands asphalt concrete laying at up to 230 °C for a short time.
Acrylic siloxane water-repellent primer for concrete, brick and plaster; on its own or under VINIKOR-akril-14 enamel.