Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
VINIKOR primer-enamel — vinyl-epoxy, for steel, galvanised steel and aluminium
VMP

VINIKOR primer-enamel — vinyl-epoxy, for steel, galvanised steel and aluminium

Primer-enamels

A two-pack vinyl-epoxy primer-enamel with adhesion to steel, galvanised steel and aluminium; it can be applied over tightly adhering rust and old coatings at temperatures down to −10 °C. The coating has low flame spread and does not emit excessive smoke or toxic products when burning, so it is suitable for ship spaces and escape routes; there is a type approval certificate of the Russian Maritime Register of Shipping. It works on its own, as a finish coat over VINIKOR-marin, VINIKOR-ecoprime-01, TSINEP or as an adhesion layer under antifouling enamel.

Specifications

ManufacturerVMP — AO “NPKh VMP”, Yekaterinburg
Typeprimer-enamels
Usesteel structures, bridges, power industry, marine and port structures, equipment
Basevinyl-epoxy, two-pack (base + hardener)
Colourto the RAL catalogue, matt uniform
Packagingkit: base in metal pails, hardener in metal cans
Application methodairless spray (nozzle 0.015–0.021″, 15–22 MPa), air spray, brush, roller; 1–2 coats; base:hardener 100:2.9 by weight; thinners SOLVIN-10, SOLVIN-15 up to 5 % (by weight); induction time after mixing 15–20 min
Application temperaturefrom −10 to +35 °C, relative humidity max. 85 %; surface at least 3 °C above the dew point
Dryingto degree 3 — no more than 3 h at 20 °C; drying between coats — at least 3 h at +20 °C; maximum overcoating interval unlimited; before service in aggressive conditions — at least 7 days at 20 °C
Key propertiesdensity — 1.1±0.1 g/cm³, pot life at 20 °C — at least 24 h, volume solids — 33±2 %, non-volatile matter by weight — 42±3 %, low flame spread, no excessive smoke or toxic products when burning (RS), service temperature — from −60 to +60 °C
Compatible materialsstand-alone coating; finish coat over VINIKOR-marin, VINIKOR-ecoprime-01, TSINEP primers; overcoated with alkyd, vinyl, vinyl-epoxy, epoxy and chlorinated rubber based enamels; adhesion layer between an epoxy system and an antifouling enamel
Shelf lifebase — 24 months, hardener — 12 months from the date of manufacture
StandardsTU 20.30.12-001-54359536-2018; state registration certificate RU.78.01.10.008.E.000705.12.21; RS type approval certificate No. 25.44.01.12117.120; approved by NPO “Lakokraspokrytie”, FSUE “Prometey” (in a system with VINIKOR-marin primer)

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by VMP