Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
VINIKOR-nord — vinyl-polyester primer-enamel for painting down to −25 °C
VMP

VINIKOR-nord — vinyl-polyester primer-enamel for painting down to −25 °C

Primer-enamels

A primer-enamel on a vinyl-polyester binder that is applied directly to metal and fibreglass and allows painting in frost — down to −25 °C. It is used on the topsides, decks and superstructures of ships, on freight rolling stock and railway infrastructure (except railway bridges), and on steel structures of oil and gas and power facilities. It goes over tightly adhering rust and old vinyl, vinyl-epoxy and epoxy coatings; it works on its own or over VINIKOR-marin, VINIKOR-ecoprime, IZOLEP-mastic primers, and the service temperature is from −60 to +60 °C.

Specifications

ManufacturerVMP — AO “NPKh VMP”, Yekaterinburg
Typeprimer-enamels
Usesteel structures, oil and gas, power industry, marine and port structures
Basevinyl-polyester binder, one-pack; applied directly to metal (DTM)
Colourgrey, black, blue, green, red-brown, beige (per the conclusion of AO “VNIIZhT”); other RAL colours by agreement; matt uniform
Packagingmetal pails
Application methodairless spray (nozzle 0.015–0.021″, 15–18 MPa), air spray, brush, roller; 1–2 coats; thinners SOLVIN-11 (up to +15 °C), SOLVIN-15 (above +15 °C), SOLV-EP — up to 15 % by weight
Application temperaturefrom −25 to +35 °C (from −15 to +25 °C recommended), relative humidity max. 85 %; surface at least 3 °C above the dew point; temperature of the prepared primer-enamel not below +15 °C
Dryingto degree 3 — no more than 3 h at 20 °C, no more than 20 min at 60 °C; drying between coats — at least 3 h at +20 °C; before service in aggressive conditions — at least 3 days at 15–22 °C
Key propertiesdensity — 1.2±0.1 g/cm³, volume solids — 42±3 %, non-volatile matter by weight — 60±2 %, resistance to short-term splashing with sea and fresh water, crude oil and petroleum products, mineral salt solutions, detergents, service temperature — from −60 to +60 °C
Compatible materialsstand-alone coating; finish coat over VINIKOR-marin, VINIKOR-ecoprime primers, IZOLEP-mastic primer-enamel and other epoxy, vinyl-epoxy, vinyl primers
Shelf life12 months from the date of manufacture
StandardsTU 20.30.12-006-67503963-2020; state registration certificate RU.77.01.34.008.E.003247.12.21; complies with the normative documents (ND) of Rosneft, Lukoil; approved by NPO “Lakokraspokrytie”, AO “VNIIZhT” (freight rolling stock and steel structures, except railway bridges)

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by VMP