Khimtek
METAPROTEK®-0962 chemical-resistant primer-enamel — two-component epoxy
Chemical-resistant epoxy primer-enamel with a corrosion inhibitor for metal and reinforced concrete structures of chemical and petrochemical plants.
Price on request
Khimtek
YARFAST®-0962 primer-enamel for aggressive media — resistant to hot alkalis
The YARFAST®-0962 primer-enamel is intended for metal and reinforced concrete structures of chemical and petrochemical plants and is resistant to hot alkali solutions. It features enhanced adhesion, including to tight rust, and forms a stand-alone coating. The material is two-component, and the pot life of the mixture is 24 h; it is applied by air and airless spray, electrostatic spraying or brush.
Specifications
| Manufacturer | Khimtek — OOO PO “Khimtek”, Yaroslavl |
|---|---|
| Type | primer-enamels |
| Use | steel structures, concrete, chemical plants, oil and gas |
| Base | Two-component: pigments and fillers in a solution of film formers in organic solvents + hardener |
| Application method | air and airless spray, electrostatic spraying, brush; thinning with R-4, R-4A, R-5, R-5A |
| Drying | painting 30 min after mixing; pot life 24 h |
| Key properties | Base:hardener ratio by weight: 100:15, Resistance: water, 3 % NaCl, industrial oil, petrol — 72 h, Resistance to hot alkali solutions, Enhanced adhesion, incl. to tight rust |
| Compatible materials | stand-alone coating |
| Shelf life | 12 months from the date of manufacture |
| Standards | TU 20.30.12-048-81922626-20 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Khimtek
Khimtek
KO-8101 Khimtek — organosilicon heat-resistant enamel up to +600 °C
Organosilicon enamel for steam pipelines, heat pipelines, oil pipelines, chimneys and steel structures, heat resistance from −60 to +600 °C.
Price on request
Khimtek
KO-8104 Khimtek — heat-resistant organosilicon enamel
Heat-resistant organosilicon enamel for tank cars, distillation columns, pipelines, chimneys and furnaces, from 400 to 600 °C depending on colour.
Price on request
Khimtek
FL-03K Khimtek — phenol-formaldehyde primer to GOST 9109-81
Phenol-formaldehyde primer for steel structures, bridges and equipment under most solvent-borne enamels, from −60 to +100 °C.
Price on request
Khimtek
KO-174 Khimtek — organosilicon enamel for metal and facades
Organosilicon enamel for steel structures, equipment, facades and porous surfaces; the silver enamel withstands up to +300 °C.
Price on request
Khimtek
KhV-0278 Khimtek — perchlorovinyl primer-enamel over rust and mill scale
One-component primer-enamel with a rust modifier for equipment and steel structures, applied over mill scale, rust and old coatings.
Price on request