Zn-YARFAST®-0561 zinc-rich primer — two-component epoxy primer
Two-component epoxy primer with zinc powder for steel structures; the pot life of the mixture with the hardener is 12 h.

METAPROTEK®-0237 is applied over spot rust in repair painting of large steel structures, pipes and rusty surfaces; the primer-enamel is also suitable for dedusted reinforced concrete. The coating is stand-alone, in 2–3 coats; the material is quick-drying and is thinned with R-4, R-4A or xylene. At 20 °C resistance to water and industrial oil is at least 48 h, to 3 % NaCl at least 72 h.
| Manufacturer | Khimtek — OOO PO “Khimtek”, Yaroslavl |
|---|---|
| Type | primer-enamels |
| Base | Pigments and fillers in a solution of a film former in organic solvents |
| Application method | air and airless spray, roller, brush; 2–3 coats; thinning with R-4, R-4A or xylene |
| Drying | quick-drying |
| Key properties | Resistance at 20 °C: water — at least 48 h, 3 % NaCl — at least 72 h, industrial oil — at least 48 h, Application over spot rust |
| Compatible materials | stand-alone coating; repair painting |
| Shelf life | storage from −40 to +40 °C |
| Standards | TU 20.30.12-071-81922626-2024 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Two-component epoxy primer with zinc powder for steel structures; the pot life of the mixture with the hardener is 12 h.
Chemical-resistant epoxy enamel for metal surfaces exposed to hot alkalis, over primed and unprimed metal.
Two-component polyurethane primer-enamel for steel structures and the external surfaces of petroleum product tanks, 1,000 h in salt spray.
Wear-resistant primer-enamel for ferrous metal, concrete and concrete floors of production and storage premises, dries in no more than 30 minutes.
Quick-drying primer-enamel for stand-alone coating and repair painting of steel structures, applied over spot rust.
Quick-drying primer-enamel for steel structures: transit (preservation) coating, primer under enamels or a stand-alone coat.