Khimtek
KO-8101 Khimtek — organosilicon heat-resistant enamel up to +600 °C
Organosilicon enamel for steam pipelines, heat pipelines, oil pipelines, chimneys and steel structures, heat resistance from −60 to +600 °C.
Price on request
Khimtek
METAPROTEK®-0962 chemical-resistant primer-enamel — two-component epoxy
The chemical-resistant METAPROTEK®-0962 is based on a modified epoxy resin with a corrosion inhibitor and is cured with the METAPROTEK hardener in a ratio of 100:15. The primer-enamel is intended for metal and reinforced concrete structures of chemical and petrochemical plants and industrial atmospheres, and is also used indoors. The stand-alone coating is applied in 2–3 coats at temperatures from +5 to +35 °C; the pot life of the mixture is at least 24 h, and resistance to water, petrol, oil and 3 % NaCl is at least 72 h.
Specifications
| Manufacturer | Khimtek — OOO PO “Khimtek”, Yaroslavl |
|---|---|
| Type | primer-enamels |
| Use | steel structures, concrete, chemical plants, oil and gas |
| Base | Two-component: pigments and fillers in a modified epoxy resin with a corrosion inhibitor + METAPROTEK hardener |
| Colour | to samples or the RAL colour card |
| Application method | air (25–35 s) and airless (40–50 s) spray, brush, roller; 2–3 coats; thinning with R-4, R-4A, R-5, R-5A |
| Application temperature | from +5 to +35 °C; relative humidity no higher than 85 % |
| Drying | to degree 3 — no more than 1.5 h at (20±2) °C; ready for use 30 min after mixing; pot life at least 24 h |
| Key properties | Base:hardener ratio: 100:15 parts, Non-volatile matter of the base by weight: at least 50 %, Adhesion: max. 1 point, Impact strength (U-1): at least 50 cm, Resistance at 20 °C: water, petrol, industrial oil, 3 % NaCl — at least 72 h, Surface preparation: GOST 9.402 (cleaning degree 2, degreasing degree 1) or Sa 2½ / St 3 |
| Compatible materials | stand-alone coating |
| Shelf life | 12 months from the date of manufacture |
| Standards | TU 20.30.12-071-81922626-2024 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Khimtek
Khimtek
YARFAST®-0962 primer-enamel for aggressive media — resistant to hot alkalis
Two-component primer-enamel for structures of chemical and petrochemical plants, resistant to hot alkalis, with adhesion to tight rust.
Price on request
Khimtek
METAPROTEK®-0237 primer-enamel — for repair painting of structures and pipes
Quick-drying primer-enamel for repair painting of large steel structures, pipes and rusty surfaces, applied over spot rust.
Price on request
Khimtek
“Fast-Primer” primer-enamel — weather-resistant “3-in-1” over rust and mill scale
Weather-resistant “3-in-1” primer-enamel for steel structures, applied over tight rust and mill scale, including at sub-zero temperatures.
Price on request
Khimtek
KhS-759 Khimtek — enamel for acid, alkali and salt media
Enamel for railway wagons, tank cars, equipment and structures in acid, alkali, salt and aggressive gas media, applied over KhS-059 or KhS-010 primer.
Price on request
Khimtek
Zn-YARFAST®-0567 primer — zinc-rich primer for elevated temperatures
Zinc-rich epoxy primer for steel structures and products operating in a corrosive environment at elevated temperatures.
Price on request