Snezhinskie Kraski
SNEZH-PRO 011M — alkyd-modified primer for rolling stock
Alkyd-modified primer for wagon bodies, transport structures and cranes, dries to degree 3 from 1.5 h at 20 °C.
Price on request
Snezhinskie Kraski
SK-MET — polyurethane enamel for C5-I and C5-M category systems
Among the polyurethane enamels of Snezhinskie Kraski, SK-MET stands out for its heat resistance in a dry non-aggressive environment up to +150 °C. The enamel serves as a topcoat over the SK-PUR, SK-PROTEKT and SK-TSINK primers and over the SK-EPOKSID-TS + SK-EPOKSID-MIO scheme, and also as a finish in fire protection systems. With the SK-EPOKSID-MIO primer-enamel it gives a system of categories C5-I and C5-M per ISO 12944, while the scheme with SK-EPOKSID-TS is designed for OM1 and at least 16 years.
Specifications
| Manufacturer | Snezhinskie Kraski — OOO “ZLKS”, Yekaterinburg |
|---|---|
| Type | polyurethane enamels |
| Use | steel structures, bridges, equipment, oil and gas |
| Base | two-component polyurethane; hardener — aliphatic lightfast polyisocyanate |
| Colour | to the RAL catalogue; semi-gloss coating |
| Application method | airless spray (nozzle 0.28–0.43 mm, 16–40 MPa); air spray (nozzle 1.7–3.0 mm, 0.25–0.4 MPa); roller; brush; solvent “SK-PUR” up to 10 % / 20 % |
| Application temperature | from −10 to +40 °C (from +5 to +40 °C recommended); relative humidity max. 80 %; surface 3 °C above the dew point |
| Drying | pot life at least 2 h; dust-free max. 1.5 h, tack-free max. 2 h at 20 °C; next coat after drying to degree 3; maximum interval up to 6 months; full cure 7 days (3 days with hot drying) |
| Compatible materials | topcoat over polyurethane or epoxy primers and primer-enamels: SK-PUR, SK-PROTEKT primer, SK-TSINK, SK-EPOKSID-TS + SK-EPOKSID-MIO; finish in fire protection systems |
| Shelf life | 24 months from the date of manufacture; storage from −40 to +40 °C in the manufacturer’s sealed containers |
| Standards | TU 20.30.12-027-51472338-2017; STO-01393674-007-2022 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Snezhinskie Kraski
Snezhinskie Kraski
SK-PROTEKT enamel — polyurethane topcoat for metal and concrete
Semi-gloss RAL enamel for bridges and chemical plants; in a system with SK-EPOKSID-MIO it lasts 10 years in a urea environment.
Price on request
Snezhinskie Kraski
MASTIKOR REM — polyurethane repair compound for the MASTIKOR coating
Paste-like polyurethane for manual repair of local defects in the MASTIKOR coating in the factory and in the field, adhesion to steel at least 7.0 MPa.
Price on request
Snezhinskie Kraski
SK-PROTEKT primer-enamel — single-coat polyurethane coating for metal
Polyurethane primer-enamel for steel structures and equipment; a single coat lasts at least 15 years in UKhL1 and KhL1 climates.
Price on request
Snezhinskie Kraski
SK-REZERV — epoxy coating for the inner surface of oil tanks
Epoxy compound for internal protection of tanks with crude oil, fuel oil, oils and water, resistant to the stored product up to +90 °C.
Price on request
Snezhinskie Kraski
SK-EPOKSID-MIO — epoxy primer-enamel with micaceous iron oxide and zinc phosphate
Epoxy primer-enamel with micaceous iron oxide for tanks, bridges and equipment, works as a stand-alone, intermediate or primer coat.
Price on request