CERTA
Certacor 111 — polyorganosiloxane primer-enamel for metal protection
Polyorganosiloxane primer-enamel for trusses, power line towers, columns, beams and pipes; system with CERTACOR 01 primer for C1–C3 per ISO 12944-2.
Price on request
CERTA
ECOZIN 96% zinc-rich primer — polyorganosiloxane cold galvanising
ECOZIN 96% is a CERTA polyorganosiloxane zinc-rich primer whose dry film contains 96 % zinc. It protects chimneys and flue gas stacks, steel structures of industrial buildings, power line and overhead contact line supports, road safety barriers and hydraulic structures, and works from −60 °C to +350 °C, and in a system with CERTA silver enamel up to +600 °C. The predicted service life in an industrial atmosphere of temperate and cold climates is at least 10 years; it is applied from −10 °C.
Specifications
| Manufacturer | CERTA — OOO “NPP “Spektr”, Novocheboksarsk |
|---|---|
| Type | cold galvanising compounds |
| Use | steel structures, equipment, power industry, oil and gas, marine and port structures |
| Base | one-component polyorganosiloxane zinc-rich material (“cold galvanising” method); solvents toluene, o-xylene |
| Colour | grey, semi-gloss |
| Packaging | 25 kg, 10 kg; 0.8 kg; aerosol 520 ml |
| Application method | air spray (working viscosity 20–30 s), airless spray (35–50 s, 80–150 bar), brush (30–50 s); 2–3 coats, stripe coat on welds and edges; preparation Sa 2½ per ISO 8501-1, dust removal not worse than class 2 per ISO 8502-3; thinning with toluene or o-xylene not more than 10 % (white spirit, solvent naphtha, petrol are not permitted) |
| Application temperature | spraying from −10 °C to +40 °C, brush and roller from −10 °C to +25 °C; relative humidity not more than 80 %; surface 3 °C above the dew point |
| Drying | intercoat drying 90 min at −10 °C, 60 min at 0 °C, 30 min at +20 °C; full properties in 72 h at +20 °C; for service above 100 °C — hot curing at commissioning: 1 h in air, heating not faster than 5 °C/min, at least 3 h at service temperature; installation — not earlier than 72 h |
| Key properties | Zinc content in the dry film: 96 %, Service temperature: from −60 °C to +350 °C; in a system with CERTA silver enamel — up to +600 °C, Predicted service life in an industrial atmosphere of temperate and cold climates: at least 10 years, Resistance to salt solutions, crude oil and petroleum products |
| Compatible materials | stand-alone coating or primer under CERTA heat-resistant anticorrosion enamel (intercoat drying before the topcoat 2 h) |
| Shelf life | 12 months from the date of manufacture; storage from −30 °C to +35 °C |
| Standards | TU 2312-008-49248846-2008 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by CERTA
CERTA
KO-815 CERTA — heat-resistant gloss varnish for metal up to +300 °C
Colourless gloss silicone varnish for ferrous and non-ferrous metals, pipelines and heat exchangers up to +300 °C.
Price on request
CERTA
CERTA heat-resistant anticorrosion enamel — silicone enamel up to +1,200 °C
One-component silicone enamel for gas and steam pipelines, chimneys, boilers and bridges; up to +1,200 °C depending on colour.
Price on request
CERTA
Certacor 110 — polyorganosiloxane primer-enamel for concrete protection up to +350 °C
Primer-enamel for concrete and reinforced concrete chimneys, tunnels, facades, cooling towers and contact line supports, heat-resistant up to +350 °C.
Price on request
CERTA
OS-12-03 CERTA (TU 84-725-78) — organosilicate primer-enamel up to +300 °C
Organosilicate primer-enamel per TU 84-725-78 for steel structures, equipment, chimneys, tunnels and facades, from −60 °C to +300 °C.
Price on request
CERTA
KO-870 CERTA — silicone enamel for steel and cement-sand substrates
One-component silicone enamel up to +700 °C for steel and cement-sand surfaces, pipelines, equipment and tanks.
Price on request