Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Epokhim Nefteprom-300S — 3-in-1 epoxy coating for oil tanks
KRASKO

Epokhim Nefteprom-300S — 3-in-1 epoxy coating for oil tanks

Tank coatings

Epokhim Nefteprom-300S is a two-component thixotropic 3-in-1 primer-enamel based on a modified epoxy resin with anticorrosive and chemical-resistant additives. It protects the inner surfaces of tanks for crude and hot oil, petrol, kerosene, diesel fuel, fuel oil, oils, acids down to pH 1.5, concentrated alkalis and 96 % alcohol; application on reinforced concrete is permitted. The coating is stand-alone and is applied without priming, and the service temperature is from −40 to +90 °C.

Specifications

ManufacturerKrasKo — OOO “NPO KRASKO”
Typetank coatings
Usetanks, oil and gas, chemical plants, concrete
Basetwo-component thixotropic 3-in-1 primer-enamel based on a modified epoxy resin with anticorrosive and chemical-resistant additives
Coloursemi-gloss, RAL 7040
Packaging25 kg
Application methodpreparation Sa2 / St3 per ISO 8501, for aggressive media — not worse than Sa 2.5
Application temperaturenot below 10 °C; relative humidity max. 80 %
Dryingpot life of the mix at least 1 h; to degree 1 (dust-free) max. 5 h, to degree 3 max. 12 h at 20 °C; strength development before service in an aggressive medium — 7 days
Key propertiesNon-volatile matter by weight (component A): 97–100 %, Service temperature: from −40 °C to +90 °C, Resistance (static, 20 °C): 3 % NaCl solution — at least 720 h; petrol — at least 240 h; oils and water — at least 10 days, Adhesion: max. 1 point, Impact strength: at least 40 cm
Compatible materialsstand-alone 3-in-1 coating, without priming
Shelf life12 months from the date of manufacture; storage from −35 to +40 °C
StandardsTU 20.30.12-061-01524656-2020

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by KRASKO