REKS
REKS® Fiks Akrep — chemical anchor for installation down to −15 °C
Two-component chemical anchor for rebar, studs and embedded parts in concrete, stone and brick at sub-zero temperatures; 410 ml cartridge.
Price on request
REKS
REKS® Fiks Epo Tiks O — epoxy chemical anchor in a 380 ml cartridge
A 380 ml coaxial cartridge with a mixing nozzle is how the chemical anchor REKS® Fiks Epo Tiks O is supplied, 24 cartridges per box. The two-component modified epoxy compound fixes deformed rebar, anchors, studs and embedded parts in concrete of grades B15–B60, reinforced concrete, natural stone and brick in interior and exterior work. At substrate temperatures of +25, +20 and +15 °C the gel time is 8, 11 and 15 minutes, and the minimum strength-gain time is 6, 7 and 18 hours.
Specifications
| Manufacturer | REKS — OOO “SPS” |
|---|---|
| Type | chemical anchors |
| Use | anchoring of rebar and bolts |
| Base | chemical anchor based on modified epoxy resin |
| Colour | grey |
| Packaging | coaxial cartridge of 380 ml supplied with a mixing nozzle.; cardboard box of 24 pcs |
| Application method | high-performance two-component chemical compound specially developed for reliable fixing of deformed rebar, anchors, studs of any diameter and other embedded parts in structures of concrete of grades B15–B60, reinforced concrete, natural stone and brick; intended for interior and exterior work; use at lower temperatures is possible, but the gel time and the time to develop strength properties will increase. The temperature of the compound in the cartridge before use… |
| Application temperature | substrate +5…+25 °C; compound in the cartridge about +20 °C |
| Key properties | tensile strength: ≥12 MPa; compressive strength: ≥50 MPa; adhesion to metal: ≥5 MPa; gel time at substrate temperature 25 °C: 8 min; gel time at substrate temperature 15 °C: 15 min; minimum strength-gain time at 25 °C: 6 h; minimum strength-gain time at 15 °C: 18 h; elongation at break: ≥4 %; gel time at substrate temperature 20 °C: 11 min; minimum strength-gain time at 20 °C: 7 h; adhesion to B25 concrete: exceeds the cohesion of concrete |
| Shelf life | 18 months from the date of manufacture |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by REKS
REKS
REKS® R3 — class R3 repair mortar, 40 MPa, for interior and exterior work
Non-shrink thixotropic class R3 mortar for local repair and levelling of reinforced concrete in industrial buildings and tanks; compression from 40 MPa.
Price on request
REKS
REKS® StruktoLit — expanding cementitious binder for injection grouts and concrete
Highly flowable expanding binder for shrinkage-compensated mortars and concrete: repair of roads, airfields, bridges and masonry; 20 kg bag.
Price on request
REKS
REKS® Fayber L — flowable repair mortar with metal fibre for work down to −10 °C
Rapid-hardening flowable R4 mortar with polymer and brass-coated metal fibre for roads, airfields and bridges; from 30 MPa after 2 hours.
Price on request
REKS
REKS® Strukto 300 — rapid-setting R4 mortar for repair and joint filling
Thixotropic class R4 cementitious mortar for fast concrete repair and joint filling in industrial buildings and tunnels; from 30 MPa after one day.
Price on request
REKS
REKS® Strukto R4 — rapid-setting fibre-reinforced repair mortar of class R4
Rapid-setting mortar for repairing concrete after rebar corrosion and impact, resistant to liquid acidic media; from 30 MPa compression after one day.
Price on request