INDASTRO
Profskrin RC462 I — expanding cementitious compound for injection and anchoring
Finely dispersed expanding cementitious compound for injection grouts, filling voids and cracks, anchors and equipment installation; 60 MPa.
Price on request
INDASTRO
Profskrin RC80 — thixotropic R4 mortar for concrete of class B60 and above
Profskrin RC80 is chosen when the concrete or reinforced concrete under repair is of class B60 and above. By 28 days the mortar reaches at least 80 MPa in compression and 10 MPa in flexure, and after 24 hours 35 and 5 MPa. It can be applied by hand or by machine, including on walls and ceilings; water impermeability W16, frost resistance F1 1000 and F2 300, service in environments with pH from 5 to 14.
Specifications
| Manufacturer | INDASTRO — OOO Sedrus, Kolomna, Nevinnomyssk, Ulyanovsk |
|---|---|
| Type | thixotropic repair mortars |
| Use | industrial buildings, columns and beams |
| Base | Portland cement, mineral filler, modifying admixtures. |
| Packaging | paper bags 25 kg (Kolomna production unit); plastic bags 25 kg (Ulyanovsk production unit); plastic bags 25 kg (Nevinnomyssk production unit) |
| Application method | Profskrin RC80 repair mortar is used for structural repair of high-strength concrete and reinforced concrete structures of strength class B60 and above. For hand and machine application. Suitable for repairing vertical and overhead surfaces. |
| Application temperature | +5…+30 °C |
| Curing | protection against moisture loss for at least 24 h (water spraying or wet hessian) |
| Key properties | mixing water: 3.0-3.3 (Kolomna (K)); 3.7-4.0 (Nevinnomyssk (N)); 3.4-3.8 (Ulyanovsk (U)); maximum aggregate size, mm: 3; workability (cone spread): 120 – 140 mm; workability retention: ≥30 min; flexural strength at 24 h: ≥5 MPa; flexural strength at 28 days: ≥10 MPa; compressive strength at 24 h: ≥35 MPa; compressive strength at 28 days: ≥80 MPa; bond strength to substrate: ≥2 MPa; linear expansion/shrinkage: ≤0.8 mm/m; service in aggressive environments: 5< pH <14; frost resistance: F1 1000; frost resistance (road and airfield concrete, mineralised medium): F2 300; water impermeability: W16; service temperature: -60…+80 °C |
| Shelf life | 12 months in paper packaging, 24 months in plastic packaging from the date of manufacture, in a dry room |
| Standards | class R4 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
Profskrin RC45 F — winter thixotropic R4 mortar for work at −10…+10 °C
Winter version of the thixotropic R4 mortar for repairing B30–B40 concrete at temperatures from −10 to +10 °C; compressive strength at 28 days from 45 MPa.
Price on request
INDASTRO
LEVELINE FS1-4 inert aggregate — graded sand for polymer compounds
Graded sand with 0.1–0.4 mm particles for filling epoxy and polyurethane compounds and creating an anti-slip surface.
Price on request
INDASTRO
Profskrin RC40 FSm — winter finishing mortar for fine finishing of concrete
Fibre-reinforced finishing mortar for fine finishing of concrete structures in winter at temperatures from −10 to +10 °C; compressive strength 40 MPa at 28 days.
Price on request
INDASTRO
LEVELINE FC810 pourable topping — for new and worn concrete floors
Pourable hardening mortar for fresh concrete and for repairing worn floors in workshops and warehouses; abrasion class AR1 to EN 13892-4.
Price on request
INDASTRO
Khimskrin LE 2k — chemical-resistant epoxy primer for concrete in aggressive environments
Two-component chemically resistant epoxy primer on concrete under lining and Khimskrin SE 2k coating; pot life at 20 °C at least 60 minutes.
Price on request