INDASTRO
Profskrin LC2.5 — anti-corrosion compound for rebar and bonding layer
Cementitious compound for protecting reinforcement against corrosion and forming a bonding layer in concrete repair; bond to the substrate from 2.0 MPa.
Price on request
INDASTRO
Profskrin RC45 FLq — winter flowable R4 mortar with polymer fibre
The winter flowable Profskrin RC45 FLq is reinforced with polymer fibre and placed at temperatures from −10 to +10 °C. At class R4 to GOST R 56378 it reaches from 15 MPa in compression after 24 hours and from 45 MPa after 28 days, modulus of elasticity at least 25 GPa, bond to the substrate from 2 MPa. Its field of application covers load-bearing and bridge structures, treatment and industrial facilities, underground ducts and pipelines; workability is retained for 10–15 minutes.
Specifications
| Manufacturer | INDASTRO — OOO Sedrus |
|---|---|
| Type | flowable repair mortars |
| Use | bridges and overpasses, tanks and treatment plants, industrial buildings, columns and beams |
| Base | Portland cement, graded sand, polymer fibre, modifying admixtures |
| Packaging | bags 25 kg |
| Application method | Profskrin RC45 FLq winter flowable-type repair mortar is used for structural repair of concrete structures: Load-bearing building structures; Bridge structures; Treatment facilities; Underground engineering structures; Industrial structures |
| Application temperature | −10…+10 °C |
| Key properties | mixing water: 3.0 – 3.5; maximum aggregate size, mm: 3; workability (cone spread): 250 – 290 mm; workability retention: 10-15 min; flexural strength at 24 h: ≥3 MPa; flexural strength at 28 days: ≥6 MPa; compressive strength at 24 h: ≥15 MPa; compressive strength at 28 days: ≥45 MPa; bond strength to substrate: ≥2 MPa; Modulus of elasticity, GPa, not less than: 25; linear expansion/shrinkage: ≤0.8 mm/m; service in aggressive environments: 5< pH <14; frost resistance: F1 600; frost resistance (road and airfield concrete, mineralised medium): F2 200; water impermeability: W12; service temperature: -60…+80 °C |
| Shelf life | 6 months in the original factory packaging from the date of manufacture, in a dry room |
| Standards | class R4 to GOST R 56378; TU 23.64.10–036–88457641-2023 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
LEVELINE FP860 polyurethane self-levelling floor — elastic solvent-free coating
Elastic polyurethane self-levelling floor for workshops, warehouses, offices and schools; elongation at break from 40%, service from −60 to +80 °C.
Price on request
INDASTRO
Innolayn NC620 R — ultra-rapid-hardening R4 grout for fast-track installation
Ultra-rapid-hardening R4 grout for equipment, anchors and sleepers in track concrete; 10 MPa in compression after just 2 hours.
Price on request
INDASTRO
LEVELINE FP840 one-component polyurethane primer — hardening impregnation for concrete
Moisture-curing polyurethane primer for polymer floors and stand-alone impregnation of concrete in workshops and warehouses; fire hazard class KM1.
Price on request
INDASTRO
Innolayn NC40 F — winter grout for work at −10…+10 °C
Cementitious grout for installing equipment, columns, joints and anchors at low temperatures; 10 MPa after 6 hours at −10 °C, 50 MPa at 28 days.
Price on request
INDASTRO
Khimskrin LE 2k — chemical-resistant epoxy primer for concrete in aggressive environments
Two-component chemically resistant epoxy primer on concrete under lining and Khimskrin SE 2k coating; pot life at 20 °C at least 60 minutes.
Price on request