INDASTRO
LEVELINE FC801 Cr corundum dry-shake topping — hardening industrial floors
Corundum dry mix for workshop and warehouse floors with medium and increased loads; abrasion class AR0.5 to EN 13892-4.
Price on request
INDASTRO
Profskrin RC80 Lq — flowable R4 repair mortar for concrete of class B60 and above
Profskrin RC80 Lq, the flowable counterpart of RC80, is intended for structural repair of concrete structures of strength class B60 and above. The mix, based on Portland cement with mineral filler and 3 mm aggregate, is poured at temperatures from +5 to +30 °C. After 24 hours it reaches from 35 MPa in compression, after 28 days from 80 MPa, in flexure 5 and 10 MPa; water impermeability W16, frost resistance F1 1000 and F2 300.
Specifications
| Manufacturer | INDASTRO — OOO Sedrus, Kolomna |
|---|---|
| Type | flowable repair mortars |
| Use | industrial buildings, columns and beams |
| Base | Portland cement, mineral filler, modifying admixtures. |
| Packaging | paper bags 25 kg (Kolomna production unit) |
| Application method | Profskrin RC80 Lq flowable-type repair mortar is used for structural repair of concrete structures of strength class B60 and above. |
| Application temperature | +5…+30 °C |
| Curing | protection against moisture loss for at least 24 h (water spraying or wet hessian) |
| Key properties | mixing water: 3.0-3.3 (Kolomna (K)); maximum aggregate size, mm: 3; workability (cone spread): 250 – 290 mm; workability retention: ≥30 min; flexural strength at 24 h: ≥5 MPa; flexural strength at 28 days: ≥10 MPa; compressive strength at 24 h: ≥35 MPa; compressive strength at 28 days: ≥80 MPa; bond strength to substrate: ≥2 MPa; linear expansion/shrinkage: ≤0.8 mm/m; service in aggressive environments: 5< pH <14; frost resistance: F1 1000; frost resistance (road and airfield concrete, mineralised medium): F2 300; water impermeability: W16; service temperature: -60…+80 °C |
| Shelf life | 12 months in paper packaging, 24 months in plastic packaging from the date of manufacture, in a dry room |
| Standards | class R4 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by INDASTRO
INDASTRO
LEVELINE FC70 S quartz dry-shake topping — hardening fresh concrete floors
Dry quartz mix for hardening freshly laid concrete in workshops, warehouses and car parks; compressive strength from 70 MPa at 28 days.
Price on request
INDASTRO
LEVELINE SPu 2k — matt polyurethane varnish for polymer floors
Two-component matt polyurethane varnish for protecting epoxy and polyurethane floors and sealing chips; gloss level 7–9%.
Price on request
INDASTRO
Profskrin RC80 — thixotropic R4 mortar for concrete of class B60 and above
Thixotropic R4 repair mortar for structures made of B60 concrete and above; compressive strength at 28 days at least 80 MPa, flexural strength 10 MPa.
Price on request
INDASTRO
Profskrin RC470 — R4 repair mortar for structures of class B50 and above
Thixotropic R4 mortar for repairing high-strength concrete and reinforced concrete of B50 and above; 70 MPa at 28 days, water impermeability W20.
Price on request
INDASTRO
Profskrin RC40 FSm — winter finishing mortar for fine finishing of concrete
Fibre-reinforced finishing mortar for fine finishing of concrete structures in winter at temperatures from −10 to +10 °C; compressive strength 40 MPa at 28 days.
Price on request