GLIMS
GLIMS® PRO ANCHOR — flowable R4 anchoring grout for equipment grouting
High-strength non-shrink flowable R4 grout for anchors, equipment grouting and underwater concreting; 80 MPa at 28 days.
Price on request
GLIMS
GLIMS® PRO CRF-40 Rapid — rapid-hardening flowable R4 mortar for urgent repair
The rapid-hardening flowable mix GLIMS® PRO CRF-40 Rapid, class R4 to GOST R 56378, is intended for structural repair of concrete and reinforced concrete within tight deadlines, including at sub-zero temperatures: it is used from −10 to +35 °C. After 2 hours compressive strength reaches 10 MPa, after 28 days 45 MPa. The mix is used on bridges, bridge spans, in tunnels, on car parks, viaducts, industrial floors and equipment foundations, and for monolithic joining; pot life is 20 minutes at −10…+10 °C and 15 minutes at +10…+35 °C.
Specifications
| Manufacturer | GLIMS — AO GLIMS-Production, Podolsk |
|---|---|
| Type | flowable repair mortars |
| Use | bridges and overpasses, tunnels and metro, hydraulic structures and dams, floors, equipment foundations |
| Base | Rapid-hardening flowable repair mix based on special cements, graded sand, mineral fillers and chemical admixtures |
| Colour | grey |
| Packaging | bag 25 kg |
| Application method | monolithic joining; port and hydraulic structures |
| Application temperature | −10…+35 °C |
| Key properties | mixing water: 0.14–0.15 l per 1 kg; pot life: 20 min at −10…+10 °C, 15 min at +10…+35 °C; adhesion: 2 MPa; compressive strength at 2 h / 28 days: ≥10 / ≥45 MPa; flexural strength: ≥6 MPa; frost resistance: F2 300; water impermeability: W12 |
| Shelf life | 12 months from the date of manufacture in undamaged original factory packaging in a dry room |
| Standards | class R4 to GOST R 56378; TU 5745-010-40397319-2003 No. 0500/5 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by GLIMS
GLIMS
GLIMS® CF-40 — self-levelling cement floor
Non-shrink M250 cement self-levelling floor — a base for tiles, parquet, linoleum and epoxy or polyurethane coatings.
Price on request
GLIMS
GLIMS® PRO CRP-40 0.5 — finishing thixotropic R3 mortar for restoring geometry
Non-shrink finishing R3 mortar for finishing concrete and stone surfaces and repairing dormant cracks; contact with drinking water is permitted.
Price on request
GLIMS
GLIMS® PRO CRT-40 — thixotropic R3 mortar for local structural repair
Thixotropic R3 mortar for repairing concrete of B20 and above on walls and ceilings without formwork: bridges, tunnels, car parks; 40 MPa at 28 days.
Price on request
GLIMS
GLIMS® PRO FS Screed 1K — high-strength cement floor screed
High-strength M400 cement screed for production halls, warehouses, car parks and car service stations, including unheated ones; walkable after 24 h.
Price on request
GLIMS
GLIMS® PRO CRT-20 — thixotropic R2 mortar for non-structural repair
Thixotropic R2 mortar with fibre for filling voids, caulking joints, repairing manholes and tanks; compressive strength from 20 MPa at 28 days, W8.
Price on request