OGNEZA-PM-K cable penetration
Split steel cable penetration with an intumescent insert for single cables and bundles through walls and floors; IET 180.

The dry version of OGNEZA-PO-T is a concentrate that is diluted with water at a temperature of at least 15 °C at a ratio of 1:3. The resulting solution is used to treat fabrics made of cotton, cotton-polyester and synthetics, as well as carpets, by spraying or dipping, after which the material becomes hard-to-ignite per GOST R 50810-95. The concentrate can be stored for up to 20 years at temperatures from −60 to +80 °C. It is supplied in paper or polypropylene bags of 25 kg.
| Manufacturer | OGNEZA — OOO “OGNEZA”, St Petersburg |
|---|---|
| Fire protection performance | hard-to-ignite per GOST R 50810-95 |
| Application | fabrics, roofing and other materials |
| Service conditions | fabrics (cotton, cotton-polyester, synthetics) and carpets |
| Base | dry concentrate, diluted with water (t ≥ 15 °C) 1:3 |
| Packaging | 25 kg (paper or polypropylene bags) |
| Application method | spraying, dipping |
| Application temperature | from +5 to +35 °C |
| Drying | up to 24 h (spraying), up to 48 h (dipping); between coats 2 h |
| Shelf life | 20 years |
| Standards | GOST R 50810-95; state registration certificate |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Split steel cable penetration with an intumescent insert for single cables and bundles through walls and floors; IET 180.
Concentrate for preparing a fire and bio-protective timber impregnation: groups I and II per GOST R 53292, for use indoors and outdoors without precipitation.
Non-combustible mastic for fire protection of air ducts — an alternative to basalt materials; EI 30, EI 45, EI 60 per GOST R 53299-2019.
Non-combustible (NG) paste adhesive on an inorganic binder for fixing basalt materials on air ducts and facades.
Acrylic fire-retardant varnish for timber, concrete, brick and plaster indoors and outdoors; class KM2 (G1, D2, T2), clear or tinted.
Acrylic highly elastic fire-stopping sealant for expansion joints and pipe penetrations; up to EI 240, operates from −60 to +120 °C.