OGNEZA-GT intumescent fire-protective sealant
Acrylic intumescent sealant for cable penetrations and joints in walls and floors; TR EAEU 043/2017 certificates for 60 and 150 minutes.

Single cables and bundles are passed through walls and floors via the OGNEZA-PM-K penetration. The design is a split red powder-coated steel body with an OGNEZA-TRM insert that expands from +150 °C. The penetration is installed from both sides — in a sleeve, in a metal embedded pipe or in an opening with mineral wool. The fire resistance rating is IET 180, the operating range from −50 to +80 °C, and the service life 30 years. Sizes range from PM-K-20/40 to PM-K-125.
| Manufacturer | OGNEZA — OOO “OGNEZA”, St Petersburg |
|---|---|
| Fire protection performance | IET 180 (180 minutes) |
| Application | cable lines, penetrations and joints |
| Service conditions | cable lines (single and bundles) through walls and floors, incl. in a metal embedded pipe; walls at least 150 mm; service temperature from −50 to +80 °C |
| Base | split powder-coated steel body + OGNEZA-TRM insert; expansion from +150 °C |
| Colour | red |
| Packaging | PM-K-20/40 … PM-K-125; box up to 15 kg |
| Application method | installed from both sides in a sleeve or in an opening with mineral wool; fixed with dowels/anchors |
| Shelf life | 12 months |
| Standards | TU 25.11.23-038-92450604-2021; certificate under TR EAEU 043/2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Acrylic intumescent sealant for cable penetrations and joints in walls and floors; TR EAEU 043/2017 certificates for 60 and 150 minutes.
Self-priming fire-retardant varnish for timber, including parquet and facades: groups I and II, G1, V1, D2, T2, RP1, UV resistance.
Water-based intumescent paint for fire protection of steel structures indoors: 15–90 minutes, groups 7–3 per GOST R 53295.
Non-combustible (NG, KM0) one-component mastic for fire protection of bituminous and acrylic roof waterproofing layers, seams and joints.
Non-combustible silica roll seal (NG, KM0) for air duct and chimney flanges and for gaps in fire-rated glazing.
Self-adhesive intumescent tape for fire doors, hatches, dampers and air duct flanges; up to EI 240 as part of an assembly.