OGNEZA-KM0 Kolor non-combustible paint
Non-combustible KM0 paint with factory tinting for mineral surfaces indoors and outdoors under a canopy; not intended for metal.

Small ventilation ducts — no more than 130 mm in diameter, including plastic ones — are protected with the OGNEZA-PM(V)-P collar. Model P-01 has a perforated powder-coated steel body and an OGNEZA-TRM insert, while P-02 has a non-split body with mesh and OGNEZA-LTU tape. The collars are installed on both sides of the duct with self-tapping screws or anchors, and the gap and the pipe cut are sealed with OGNEZA-VG sealant. The fire resistance rating is at least EI 180; installation is possible at temperatures from −50 to +60 °C.
| Manufacturer | OGNEZA — OOO “OGNEZA”, St Petersburg |
|---|---|
| Fire protection performance | at least EI 180 |
| Application | air ducts, penetrations and joints |
| Service conditions | ventilation ducts (incl. plastic) no more than 130 mm in diameter; any routing |
| Base | perforated powder-coated steel body + OGNEZA-TRM insert; P-02 — non-split body with mesh and OGNEZA-LTU tape |
| Packaging | sizes from 50 to 110 mm |
| Application method | installed on both sides of the duct, fixed with self-tapping screws/anchors (metal dowels), gap and pipe cut — OGNEZA-VG sealant |
| Application temperature | installation from −50 to +60 °C |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Non-combustible KM0 paint with factory tinting for mineral surfaces indoors and outdoors under a canopy; not intended for metal.
Dry concentrate of fire-retardant impregnation for timber, diluted with water 1:3; groups I and II per GOST R 53292, 25 kg bags.
Modular cable penetration with a removable cover: cables are added and removed without dismantling; for walls and floors, including gypsum fibre board walls.
Water-based intumescent paint for fire protection of steel structures indoors: 15–90 minutes, groups 7–3 per GOST R 53295.
Solvent-borne fire-retardant paint for timber and concrete indoors and on facades; fire protection performance groups I and II, class KM1.
Water-based impregnation for fabrics and carpets that makes the material hard-to-ignite per GOST R 50810-95 and leaves no marks.