OGNEZA-GT intumescent fire-protective sealant
Acrylic intumescent sealant for cable penetrations and joints in walls and floors; TR EAEU 043/2017 certificates for 60 and 150 minutes.

If cable routes are going to change, the modular OGNEZA-PM-K penetration is convenient: thanks to the removable cover, cables are added and removed without dismantling the assembly. Inside the steel body there is an intumescent material that expands by at least 900 % and a basalt smoke- and heat-insulating gasket. The penetration suits walls and floors in buildings of any purpose, including gypsum fibre board (GVL) walls, and operates from −50 to +80 °C. The model range covers different cables; the service life is at least 30 years.
| Manufacturer | OGNEZA — OOO “OGNEZA”, St Petersburg |
|---|---|
| Application | cable lines, penetrations and joints |
| Service conditions | cable line crossings with walls and floors in buildings of any purpose, incl. gypsum fibre board (GVL) walls; service temperature from −50 to +80 °C |
| Base | steel body with removable cover + intumescent material (expansion at least 900 %) + basalt smoke/heat-insulating gasket |
| Colour | red |
| Packaging | model range for different cables |
| Application method | cables can be added and removed without dismantling |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Acrylic intumescent sealant for cable penetrations and joints in walls and floors; TR EAEU 043/2017 certificates for 60 and 150 minutes.
Self-adhesive intumescent tape for fire doors, hatches, dampers and air duct flanges; up to EI 240 as part of an assembly.
Fire collar for ventilation ducts, including plastic ones, up to 130 mm in diameter; fire resistance rating at least EI 180.
Concentrate for preparing a fire and bio-protective timber impregnation: groups I and II per GOST R 53292, for use indoors and outdoors without precipitation.
Telescopic fire collar for 125–240 mm ventilation ducts in walls with an additional partition and an air gap; EI 180.
Non-combustible KM0 paint with factory tinting for mineral surfaces indoors and outdoors under a canopy; not intended for metal.