OGRAX
OGRAX-Ch epoxy fire protection coating
Two-component epoxy coating for fire protection of steel in open industrial atmospheres (C5), suitable for hydrocarbon fire conditions.
Price on request
OGRAX
OGRAX-L1 roll-type fire protection for cables
OGRAX-L1 is “dry” cable fire protection: instead of paint, it uses a flexible roll material based on rubber and mineral fillers applied to fibreglass fabric. It is wound around armoured, contaminated and flood-prone cables, as well as cables with bitumen braiding — coated side out, with overlapping joints and fixed with clamping devices. The material works at humidity up to 100% and outdoors, from −50 to +60 °C; compliance with GOST R 53311-2009 is confirmed by a certificate. The service life is at least 25 years, and the shelf life is 2 years.
Specifications
| Manufacturer | OGRAX — GK Unihimtek, Moscow Region |
|---|---|
| Fire protection performance | complies with GOST R 53311-2009 (TR EAEU 043/2017 certificate) |
| Application | cable lines |
| Service conditions | high humidity (up to 100%) and outdoors, from −50 to +60 °C; armoured, contaminated and flood-prone cables, cables with bitumen braiding |
| Base | flexible intumescent roll material based on rubber and mineral fillers on fibreglass fabric |
| Colour | black |
| Packaging | rolls up to 0.9 m wide, 10.5 or 15.9 m long |
| Application method | wound coated side out, with joint overlaps of at least 10 mm, fixed with clamping devices |
| Shelf life | 2 years |
| Standards | TU 5728-031-13267785-03 with Amendment 1; GOST R 53311-2009; TR EAEU 043/2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by OGRAX
OGRAX
OGRAX-LTU fire protection tape
Extruded tape of oxidised graphite and PVC with an adhesive transfer layer; 90 minutes of protection against the passage of gases, flame and smoke.
Price on request
OGRAX
OGRAX-VENT air duct fire protection system (OGRAX-BM + OGRAX-K adhesive)
Fire protection of air ducts with OGRAX-BM foil-faced basalt material on OGRAX-K adhesive; EI 60 and EI 90 ratings.
Price on request
OGRAX
OGRAX-L fire protection tape
Flexible tape of oxidised graphite and rubber, including a self-adhesive version, for gaps in doors, hatches, dampers and flanges; up to 150 minutes.
Price on request
OGRAX
OGRAX-MSK weather-resistant fire protection paint
Single-component paint based on intercalated graphite for fire protection of steel outdoors and in damp premises, R45–R90.
Price on request
OGRAX
OGRAX-MD fire protection coating for timber
Organic-based intumescent compound for fire protection of timber structures outdoors and indoors, from −50 to +50 °C.
Price on request