OGRAX
OGRAX-SKE epoxy fire protection coating
Two-component epoxy fire protection coating for steel in aggressive environments and marine climates, R45–R120, hydrocarbon fire.
Price on request
OGRAX
OGRAX-L fire protection tape
Gaps in fire doors, partitions, dampers, lift shafts, safes, hatches and windows, as well as flange joints of air ducts, are sealed with OGRAX-L tape. It is made of oxidised graphite and rubber on a calico backing and prevents the passage of hot gases, flame and smoke for up to 150 minutes. The tape is fixed with its adhesive layer, with glue or mechanically; installation only at positive temperatures. Once installed, it can be painted over and covered with wallpaper. Widths range from 8 to 1400 mm, and the service life is at least 25 years.
Specifications
| Manufacturer | OGRAX — GK Unihimtek, Moscow Region |
|---|---|
| Fire protection performance | seals gaps against hot gases, flame and smoke for up to 150 min |
| Application | air ducts, fabrics, roofing and other materials |
| Service conditions | fire doors, partitions, dampers, lift shafts, safes, hatches, windows, flange joints of air ducts; from −60 to +60 °C at 100% humidity |
| Base | flexible roll material based on oxidised graphite and rubber, on calico, including self-adhesive |
| Colour | black |
| Packaging | rolls of 10.5 and 15.9 m; width 8–1400 mm; cardboard boxes |
| Application method | installation only at positive temperatures |
| Application temperature | positive temperatures only |
| Compatible primers and topcoats | can be painted over and covered with wallpaper |
| Shelf life | 1 year |
| Standards | TU 23.99.14-072-13267785-2019 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by OGRAX
OGRAX
OGRAX-M fire protection coating for cables
Weather-resistant solvent-based coating for fire protection of cables, including flood-prone ones; from −60 to +250 °C, GOST R 53311-2009.
Price on request
OGRAX
OGRAX-KP cable penetration seals
Permanent cable penetration seal of mineral wool boards and OGRAX-VV compound for walls and floors; fire resistance up to 90 minutes.
Price on request
OGRAX
OGRAX-KSK fire protection system (OGRAX-T + OGRAX-SK-1)
Combined two-layer coating for steel in heated premises: OGRAX-T thermal fire-insulating layer and SK-1 intumescent paint, R90–R120.
Price on request
OGRAX
OGRAX-PPU spray-applied fire protection (polyurethane foam)
Two-component spray polyurethane foam for structural fire and cryogenic protection of steel structures; ratings of 60, 90, 120 and 150 minutes.
Price on request
OGRAX
OGRAX-L1 roll-type fire protection for cables
Flexible intumescent roll material on fibreglass fabric for dry fire protection of cables, including armoured and flood-prone ones.
Price on request