Stabiterm-221 fire protection compound for steel structures (organic-based)
Thick-film organic-based fire protection compound for steel structures, R150 (group 1), can be applied at −15 °C.

Stabiterm-207 is a one-component fire protection paint in an organic solvent, thinned with xylene; airless application is permitted even in frost, down to −15 °C. The coating provides fire protection performance group 2 (R120) with a range of 15–120 minutes. It is used inside buildings and under canopies, and for outdoors it is overcoated with Stabiterm-007 enamel; the optimum primer in this system is Stabiterm-022. Available in white or grey, in 25 kg metal cans.
| Manufacturer | Stabiterm — OOO NPF Fire Protection Laboratory, Dzerzhinsk |
|---|---|
| Fire protection performance | fire protection performance group 2 (R120); 15–120 min |
| Application | steel structures |
| Service conditions | enclosed premises or under a canopy; outdoors, with Stabiterm-007 protective enamel |
| Base | one-component paint in an organic solvent (thinner: xylene) |
| Colour | white or grey, can be tinted in pastel shades |
| Packaging | metal can, 25 kg |
| Application method | airless application |
| Application temperature | minimum −15 °C |
| Compatible primers and topcoats | optimum: Stabiterm-022 primer and Stabiterm-007 enamel; compatible with other primers and finishing enamels |
| Shelf life | 12 months in unopened factory packaging |
| Standards | GOST R 53295-2009; TR EAEU 043/2017 certificate |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Thick-film organic-based fire protection compound for steel structures, R150 (group 1), can be applied at −15 °C.
Ready-to-use water-based intumescent paint for steel structures, R120 (group 2), white, in a 20 kg pail or can.
Intumescent polyurethane foam block for fire protection of cable penetrations, metal pipe penetrations, openings and joints.
Cement-based dry mix for structural fire protection of steel and reinforced concrete with an R150 rating (group 1), 12 kg bag.
Solvent-borne intumescent paint for steel, R120 (group 2), resistant to petroleum products, no finishing coat needed.
Clear two-component epoxy varnish for fire protection of wood, group 1 to GOST R 53292-2009, G1, V1, D2, T2, RP1.