Stabiterm
Stabiterm-209 fire protection paint (solvent-borne)
Solvent-borne intumescent paint for steel, R120 (group 2), resistant to petroleum products, no finishing coat needed.
Price on request
Stabiterm
Stabiterm-400 two-component fire protection system
A two-component intumescent system: the base is mixed with the hardener in a 4:1 ratio. Stabiterm-400 has confirmed fire protection performance groups 2, 3 and 4, including in hydrocarbon fire tests to GOST EN 1363-2-2014; for this regime the coating is reinforced with Stabiterm-SA mesh. There are two versions: a 20 + 5 kg kit for high-pressure units with separate feed and a 4 + 1 kg repair kit for manual application. The coating is suitable both for buildings and for outdoors, and it is rated for seismic intensity of 9 points on the MSK-64 scale.
Specifications
| Manufacturer | Stabiterm — OOO NPF Fire Protection Laboratory, Dzerzhinsk |
|---|---|
| Fire protection performance | fire protection performance groups 2, 3, 4 (TR EAEU 043/2017); tested to GOST R 53295-2009 and GOST EN 1363-2-2014 (hydrocarbon fire) |
| Application | steel structures |
| Service conditions | enclosed premises and outdoors |
| Base | two-component intumescent system (base + hardener, 4:1) |
| Colour | grey, shade not standardised |
| Packaging | version 1: component A 20 kg + component B 5 kg; version 2: A 4 kg + B 1 kg |
| Application method | version 1: high-pressure units with separate feed (GRACO type), automatic 4:1 metering; version 2: manual application (repair kit) |
| Application temperature | from +5 °C to +40 °C; relative humidity no more than 80 % |
| Drying | full stabilisation of the coating: 24 h at 20–30 °C |
| Shelf life | 6 months in unopened factory packaging |
| Standards | GOST R 53295-2009; GOST EN 1363-2-2014; TR EAEU 043/2017 certificate |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Stabiterm
Stabiterm
Stabiterm-021 fire-stop block
Intumescent polyurethane foam block for fire protection of cable penetrations, metal pipe penetrations, openings and joints.
Price on request
Stabiterm
Stabiterm-300 fire protection mesh for cable lines
Flexible intumescent mesh for fire protection of cable routes, installed without wet processes, 1 × 20 m roll.
Price on request
Stabiterm
Stabiterm-008 fire protection mix for cable penetrations
Dry mineral mix for sealing cable penetrations in walls and floors, fire resistance up to 180 minutes, 12 and 15 kg bags.
Price on request
Stabiterm
Stabiterm-225 fire protection coating for cables
Water-dispersion intumescent compound for fire protection of cable lines indoors and outdoors, 20 kg containers.
Price on request
Stabiterm
Stabiterm-002 fire protection dry mix (cement-based)
Cement-based dry mix for structural fire protection of steel and reinforced concrete with an R150 rating (group 1), 12 kg bag.
Price on request