Stabiterm-400 two-component fire protection system
Two-component intumescent coating for steel structures, fire protection performance groups 2–4, also tested for hydrocarbon fire.

Cable lines with PVC, polyethylene or rubber sheathing are coated with Stabiterm-225 fire protection compound. It is made on a water-dispersion binder, intumesces when heated and serves inside buildings and outdoors, from −50 to +50 °C, including in moderately aggressive environments. The permissible continuous current of the cable is only slightly reduced after coating: the corresponding factor is 0.98 or higher. The compound complies with GOST R 53311-2009; it is sprayed with an airless unit or applied by brush and roller, from +5 °C.
| Manufacturer | Stabiterm — OOO NPF Fire Protection Laboratory, Dzerzhinsk |
|---|---|
| Application | cable lines |
| Service conditions | indoors and in open atmosphere (from −50 °C to +50 °C), moderately aggressive environments |
| Base | intumescent compound on a water-dispersion binder; solids content at least 65 % |
| Packaging | plastic pail or metal can, 20 kg |
| Application method | airless spraying or manually by brush/roller |
| Application temperature | minimum +5 °C |
| Shelf life | 12 months in unopened factory packaging |
| Standards | GOST R 53311-2009; TR EAEU 043/2017 certificate |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Two-component intumescent coating for steel structures, fire protection performance groups 2–4, also tested for hydrocarbon fire.
Flexible intumescent mesh for fire protection of cable routes, installed without wet processes, 1 × 20 m roll.
Dry mineral mix for sealing cable penetrations in walls and floors, fire resistance up to 180 minutes, 12 and 15 kg bags.
Thick-film water-based compound for fire protection of steel structures with an R150 rating (group 1), packed in 16 or 20 kg.
Solvent-borne intumescent paint for steel, R120 (group 2), resistant to petroleum products, no finishing coat needed.
Clear two-component epoxy varnish for fire protection of wood, group 1 to GOST R 53292-2009, G1, V1, D2, T2, RP1.