AKVASTOP INJEKTO system — injection hoses for concreting joints
Injection hoses for construction joints, butt joints and pipe-to-wall details: the joint is sealed by injecting a compound after concreting.
The TARAKAN-120 profile is an internal PVC-P waterstop for three-dimensional movement: it accommodates joint displacement in several directions at once. The permissible compression is 15 mm, tension and shear 40 mm each, and water pressure 0.41 MPa. The waterstop is used in expansion joints of foundations and tunnels both in new construction and in repair and is supplied in 10 m coils.
| Manufacturer | AKVASTOP — OOO “Akvabarier” |
|---|---|
| Type | waterstops and swelling profiles |
| Use | foundations and basements, tunnels and metro, joints and junctions, leak repair |
| Base | extruded profile; material: PVC-P |
| Packaging | coils of 10 linear m |
| Application method | installation according to technological regulation TR 186-07 |
| Key properties | sizes: TARAKAN-120; movements (compression/tension/transverse shear/longitudinal shear) 15/40/40/40 mm; permissible water pressure 0.41 MPa; materials: PVC-P (TU 5772-001-58093526-11): Shore A hardness 70±5, tensile strength at break at least 10 MPa, elongation at least 320 % (at −20 °C at least 200 %), water absorption not more than 0.25 %, density not more than 1.35 g/cm3, brittleness temperature not higher than −40 °C, combustibility group G4, weldability ≥0.6 (DIN 18541-2), service temperatures −37…+70 °C; PVC-PK-MBS variant (oil- and petrol-resistant, TU 32.99.59-009-58093526-2018): strength at least 10 MPa, elongation at least 300 %, service temperatures −37…+70 °C |
| Shelf life | store in closed rooms at a temperature not higher than +30 °C, without deforming loads, direct sunlight, petroleum products and solvents; guaranteed shelf life 2 years from the date of manufacture; guaranteed service life 5 years |
| Standards | waterstops — TU 5775-02-46603100-03 amend. 1, 2 (extrusion); materials — TU 5772-001-58093526-11 (EPDM rubber, PVC-P) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Injection hoses for construction joints, butt joints and pipe-to-wall details: the joint is sealed by injecting a compound after concreting.
Bentonite strip on butyl rubber for construction joints, junctions and utility penetrations; resists water pressure up to 18 atm.
Repair waterstop for restoring the tightness of leaking expansion joints in operating underground structures.
Waterstop for forming and sealing planned shrinkage joints by deliberately weakening the concrete section.
Internal waterstop for construction joints in foundations, tunnels and tanks; permissible water pressure up to 0.98 MPa.
External PVC-P expansion-joint waterstop designed to work together with waterproofing membranes; joint tension up to 120 mm.