ALFAPOL EP-2 — epoxy self-levelling floor
Solvent-free self-levelling epoxy floor for workshops, retail and public buildings, resistant to water and chemical media.

The AK magnesia self-levelling floor gives a non-shrink antistatic coating: the mix is prepared from the dry component and gauging liquid concentrate and laid over a copper earthing circuit. Compressive strength is at least 50 MPa, flexural strength 8 MPa, bond strength to concrete 2 MPa, abrasion no more than 0.4 g/cm². The coating is resistant to petrol and mineral oil, non-combustible (NG) and suitable not only for workshops and warehouses but also for retail and public premises.
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | floor material |
| Use | production halls, warehouses and logistics, antistatic/conductive, retail and public |
| Base | magnesite; Magnesia-based antistatic industrial self-levelling floor B40, non-shrink non-combustible finishing coating |
| Colour | base grey or tinted |
| Packaging | Component A - dry mix: polypropylene bag - 25 kg Component B - gauging liquid concentrate with a density of 1.29 kg/l: drum or canisters of various sizes. |
| Application temperature | substrate moisture, max.: 5% |
| Curing | Site foot traffic possible after: 8-10 hours |
| Key properties | Service temperature: from -30 to +40°C; Compressive strength at 28 days, min.: 50 MPa; Flexural tensile strength at 28 days, min.: 8 MPa; Bond strength to concrete, min.: 2 MPa; Abrasion, max.: 0.4 g/cm²; Volume electrical resistance (point-to-ground), less than: 10^6; Surface electrical resistance (point-to-point), less than: 10^6; Corrosion resistance, GOST 27677-88: petrol, mineral oil; Radiation safety standard (NRB-99/2009): class 1; Combustibility class, GOST 30244-94: NG (non-combustible); Max. aggregate size: 0.63 mm |
| Layer thickness | Single layer thickness: from 5 to 25 mm |
| Consumption | Material consumption: 1.43 kg/m²/mm |
| Shelf life | Guaranteed shelf life of the dry mix is 6 months from the date of production, provided it is stored in the original undamaged packaging in a dry room on pallets. |
| Standards | TU 5745-001-82166262-2001; combustibility class per GOST 30244-94 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Solvent-free self-levelling epoxy floor for workshops, retail and public buildings, resistant to water and chemical media.
Non-shrink magnesia concrete floor on crushed granite for workshops, warehouses, retail and public buildings, abrasion up to 0.4 g/cm².
Non-sparking antistatic polyurethane-cement floor for workshops, food and chemical plants, with service temperatures up to +130 °C.
Cement-based non-sparking thixotropic mix with fine aggregate for repair and finish levelling of substrates in workshops and outdoor areas.
Cement-based "liquid topping" with microfibre for floors under significant abrasive and impact loads, on old and fresh concrete.
Self-levelling cement floor resistant to petroleum products for workshops and warehouses: abrasion no more than 0.6 g/cm², W8, F300.