ALFAPOL
ALFAPOL EP-2Kh — chemical-resistant epoxy self-levelling floor
Epoxy self-levelling floor resistant to petroleum products, acid and alkali solutions for workshops, food and pharmaceutical plants.
Price on request
ALFAPOL
ALFAPOL EP-2DA — decontaminable epoxy floor coating
A specialised coating for controlled areas of nuclear power plants, nuclear heat supply plants, nuclear CHP plants and radiochemical facilities: the self-levelling epoxy layer is radiation-resistant and can be decontaminated. Shore D hardness is at least 80, tensile strength 8 MPa, impact strength from 50 cm, Taber abrasion up to 50 mg, bond strength to concrete 2 MPa. The material is resistant to water and chemical media and serviceable from −30 to +50 °C, with full cure in 7 days.
Specifications
| Manufacturer | ALFAPOL — OOO “ALFAPOL”, Saint Petersburg |
|---|---|
| Type | epoxy floors |
| Use | production halls, chemically resistant |
| Base | epoxy; Epoxy decontaminable radiation-resistant protective coating |
| Colour | Colour, RAL: 7001 |
| Packaging | Metal containers: Component A 20 kg, Component B 5 kg |
| Application temperature | Application temperature, °C: +10 to +30 |
| Curing | At 10 / 20 / 30 °C: foot traffic after 3 / 2 / 1 days, medium load after 7 / 5 / 3 days, full load after 10 / 7 / 5 days; Recoat interval, hours: 12-24; Foot traffic, min., hours: 24; Full cure, min., days: 7 |
| Key properties | Service temperature, °C: -30 to +50; Bond strength to concrete (failure in concrete), min., MPa: 2; Shore D hardness, min.: 80; Tensile strength, min., MPa: 8; Impact strength, cm, min.: 50; Elongation at break, min., %: 9; Flexibility in bending, cm, max.: 5; Taber abrasion (CS10/1000 g/1000 rev), max., mg: 50 |
| Layer thickness | Layer thickness, mm: 0.5 - 5 |
| Consumption | Consumption: 1.55 kg/m²/mm |
| Shelf life | Shelf life in unopened factory packaging – 6 months from the date of manufacture.; Shelf life, months: 6 |
| Standards | TU 20.16.40-001-82166262-2015 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by ALFAPOL
ALFAPOL
ALFAPOL VB(i) AS — antistatic non-sparking concrete floor
Cement-based antistatic concrete floor with crushed marble for workshops, warehouses and outdoor areas where the coating must not spark or build up charge.
Price on request
ALFAPOL
ALFAPOL EP-1G — epoxy primer and base for repair putty
Two-component epoxy primer for mineral substrates before polymer coatings and a base for quartz-filled putty.
Price on request
ALFAPOL
ALFAPOL MB — magnesia industrial concrete floor
Non-shrink magnesia concrete floor on crushed granite for workshops, warehouses, retail and public buildings, abrasion up to 0.4 g/cm².
Price on request
ALFAPOL
ALFAPOL VB ZIMA — concrete floor for laying at low temperatures
Industrial concrete floor that can be laid at −5…+10 °C, for workshops, warehouses, wet rooms and open areas.
Price on request
ALFAPOL
ALFAPOL EP-2AS — antistatic epoxy self-levelling floor
Solvent-free antistatic epoxy self-levelling floor for production sites, warehouses, food and pharmaceutical premises and retail halls.
Price on request