BIRSS
BIRSS 59 S1 M800 — high-strength pourable R4 mix for pavements and anchoring
Flowable non-shrink mix for repairing roads, bridges, industrial floors and anchoring equipment; 80 MPa in compression at 28 days.
Price on request
BIRSS
BIRSS Izipol — elastic polyurethane self-levelling floor
Izipol is a pigmented polyurethane compound that, once cured, stays elastic down to −10 °C and withstands impact and dynamic loads. It is poured as a smooth layer or mixed with quartz sand for an anti-slip and wear-resistant coating, with Polilak sealer as the finish. Tensile strength is 10 MPa, Shore D hardness 65, bond to concrete at least 2.5 MPa; RAL colours.
Specifications
| Manufacturer | BIRSS — AO “Opytny Zavod Sukhikh Smesey”, Moscow |
|---|---|
| Type | polyurethane floors |
| Use | production halls, chemically resistant, food and pharmaceutical, car parks and ramps, warehouses and logistics, retail and public |
| Base | two-component pigmented solvent-free polyurethane compound |
| Colour | RAL colour, tinted to order |
| Packaging | metal pails, kit (A+B) 20 kg |
| Application method | poured (smooth ~2 mm); with quartz sand 2:1 (anti-slip and wear-resistant from 2 mm); finish — Polilak |
| Application temperature | substrate +15…+25 °C (3 °C above the dew point), relative air humidity not more than 80 %, substrate moisture not more than 4 % |
| Curing | drying to degree 3 — 10–12 h; further work after 12 h; foot traffic after 24 h; full cure after 7 days |
| Key properties | tensile strength 10 MPa; elastic down to −10 °C; Shore D hardness 65; bond to concrete at least 2.5 MPa (failure in the concrete); service temperature −20…+60 °C; chemical resistance: alkalis 10 %; resistant to impact and dynamic loads |
| Layer thickness | about 2 mm (smooth); from 2 mm (anti-slip, wear-resistant) |
| Consumption | smooth ~2 mm: 2.5–3 kg/m²; anti-slip from 2 mm: Izipol 2.5 kg/m² + quartz 1.25 kg/m² + top coat 0.5 kg/m²; wear-resistant from 2 mm: Izipol 2.5 kg/m² + quartz 1.25 kg/m² + broadcast |
| Shelf life | not more than 12 months in closed original packaging; protect from sunlight, heat and freezing |
| Standards | TU 2257-018-05668056-01 with amendments No. 1, No. 2 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by BIRSS
BIRSS
BIRSS 59 S2 M600 Moroz Uskorennaya — R4 mix gaining 20 MPa in 2 hours at +20 °C
Accelerated-hardening thixotropic mortar for repairing bridges, tunnels and joints at temperatures from −10 °C; 20 MPa after 2 hours at +20 °C.
Price on request
BIRSS
BIRSS Overlak / Overlak semi-matt — epoxy floor sealer
Clear water-emulsifiable epoxy sealer, gloss or semi-matt — a finish for self-levelling floors, chip-broadcast coatings and concrete.
Price on request
BIRSS
BIRSS VRS 600 — R4 repair mix for high-strength concrete structures
Fibre-reinforced thixotropic mortar for column and beam corners, balcony edges and working joints; service temperature up to +300 °C.
Price on request
BIRSS
BIRSS Leytlak — conductive layer of an antistatic floor
Water-emulsifiable epoxy conductive sealer — the intermediate electrically conductive layer of the BIRSS Leytpol antistatic floor system.
Price on request
BIRSS
BIRSS 59 S1 M1000 — non-shrink self-compacting concrete mix for grouting
Concrete mix with quartz and granite aggregates for grouting and anchoring equipment, repairing columns and joints; 100 MPa at 28 days.
Price on request