Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
BIRSS Ultrapol 100 — highly filled epoxy floor
BIRSS

BIRSS Ultrapol 100 — highly filled epoxy floor

Epoxy floors

Ultrapol 100 is an unpigmented epoxy binder that works together with the graded quartz sands “BIRSS Napolnitel Ultrapol” (Ultrapol filler), so the colour of the coating is set by the filler itself. The result is a dense floor for chemical and food production, garages, car washes, covered car parks and warehouses, including non-slip and watertight versions. Compressive strength is 100 MPa, flexural strength more than 35 MPa, service temperature up to +110 °C.

Specifications

ManufacturerBIRSS — AO “Opytny Zavod Sukhikh Smesey”, Moscow
Typeepoxy floors
Useproduction halls, chemically resistant, food and pharmaceutical, car parks and ramps, warehouses and logistics
Basetwo-component unpigmented solvent-free epoxy compound; used in a system with the graded quartz sands “BIRSS Napolnitel Ultrapol”
Colourrich colour of the quartz filler
Packagingmetal pails, kits (A+B) of 25 kg
Application methodprimer — Ultrapol 100 without filler, with a quartz broadcast; main layer with filler by squeegee (up to 5 mm) or compacted with a roller/power trowel (“helicopter”) (from 8 mm); broadcast of graded or wear-resistant filler
Application temperaturenot below +15 °C; substrate +15…+30 °C (3 °C above the dew point)
Curingdrying to degree 3 — 8–12 h; further work after 24 h; foot traffic after 3 days; full cure after 7 days
Key propertiescompressive strength 100 MPa, flexural >35 MPa (per the description); Shore hardness 80; bond to concrete at least 2.5 MPa (failure in the concrete); service temperature −30…+110 °C (wet exposure up to +95 °C short-term, +65 °C long-term); chemical resistance: acids 10 %, alkalis 50 %; resistant to most chemicals (acid solutions, alkalis, oils, solvents)
Layer thicknessfrom 5 to 100 mm (highly filled coatings); examples — up to 5 mm and from 8 mm
Consumptionself-levelling up to 5 mm: primer Ultrapol 100 0.2–0.4 + quartz 1.2 kg/m²; main layer Ultrapol 100 0.5 kg/m²/mm + Napolnitel Ultrapol 1.25 kg/m²/mm; broadcast 4–5 kg/m² (or wear-resistant filler 5–6 kg/m²); watertight from 8 mm: Ultrapol 100 0.26 kg/m²/mm + filler 1.94 kg/m²/mm
Shelf lifenot more than 12 months in closed original packaging; protect from sunlight, heat and freezing
StandardsTU 2257-018-05668056-01 with amendments No. 1, No. 2

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by BIRSS