Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-ED Antistatic Self-levelling Floor SK PROF (AST-7, AST-6) — epoxy floor
ELAKOR

Elakor-ED Antistatic Self-levelling Floor SK PROF (AST-7, AST-6) — epoxy floor

Epoxy floors

The SK PROF line antistatic epoxy floor is intended for professional use and is produced in two modifications: AST-7 for static-dissipative and conductive coatings and AST-6 for conductive coatings with a resistance to ground of 5×10⁵–10⁶ Ω. The coating is non-sparking, gloss 87–90 %, compressive strength 78 MPa, Shore D hardness 83–85. It is chosen for server rooms and computer classrooms, diagnostic rooms, laboratories, clean and ultra-clean rooms, and warehouses of explosive substances.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typeepoxy floors
Useproduction workshops, warehouses and logistics, retail and public premises, chemically resistant, antistatic/conductive
Basecoloured two-component epoxy compound; epoxy resin, hardener, fillers, functional additives, pigments
Colourcoloured
PackagingComponent “A” 21.6 kg + Component “B” 3.6 kg = Kit 25.2 kg
Application methodAntistatic self-levelling floors on concrete, sand concrete, cement screeds; “for professional use”. Concrete not lower than M200, cured for at least 28 days, moisture not more than 4 wt%, evenness not more than 4 mm under a 2 m straightedge, slope not more than 0.5%, waterproofing against groundwater, damping strip at the walls. Relative air humidity not more than 80%; surface 3°C above the dew point; joints with movement to be repeated. For use indoors and “under a canopy”.
Application temperaturesurface and air: optimum +15°C…+22°C; permissible +5°C…+25°C; materials: optimum +15°C…+20°C, permissible +15°C…+25°C
Curingpot life on the surface at (20±2)°C at least 40 min; drying to degree 3 at (20±2)°C not more than 10 h
Key propertiesA:B ratio 6:1; solids content at least 100%; density 1.55 kg/l; ultimate compressive strength 78 MPa; flexural strength 45 MPa; tensile strength 24.7 MPa; adhesion to glass not more than 1 point; impact strength (U-2M) 60 cm; flexibility (bend test) 10 mm; Shore D at 28 days 83-85; specific weight loss by wear (GOST 20811, method B) 12.1 g/m²; Taber abrasion SC-10, 1.0 kg, 28 days – 29 mg; gloss at 60° 87-90%; Rs AST-7, AST-6 less than 10^9 Ω (GOST IEC 61340-4-1-2017); Rg with an antistatic layer thickness of not more than 1.5 mm: AST-7 (V=100 V) 5x10^5-10^7 Ω, AST-6 (V=10 V) 5x10^5-10^6 Ω; conventional lightfastness at least 100 h; resistance to water and xylene at least 48 h, butyl acetate at least 24 h; fire hazard class KM2; chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Layer thicknessRg is specified for an antistatic layer thickness of not more than 1.5 mm
Consumption1.55 kg (A+B) per 1 m² at a layer thickness of 1 mm
Shelf life12 months in the manufacturer's original packaging; store and transport at temperatures from +5° to +25°C
StandardsSpark safety test report for a 2 mm thick coating; Spark safety test report for a 0.25 mm thick coating; State registration certificate “Elakor-ED”, Customs Union; Fire safety certificate “Elakor-ED”; Comprehensive tests of “Elakor-ED” coatings; NIKIMT report on decontaminability and radiation resistance “Elakor ED”; ROSTEST letter “Elakor-ED”

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR