Supply across Uzbekistan and to Kyrgyzstan, Tajikistan and Turkmenistan +998 93 815 00 53 Telegram sale@coatix.uz
Elakor-PU Lyuks Emal Semi-Matt — lightfast semi-matt polyurethane enamel
ELAKOR

Elakor-PU Lyuks Emal Semi-Matt — lightfast semi-matt polyurethane enamel

Polyurethane floors

The semi-matt version of the Lyuks enamel gives a gloss of 25–40 % and is likewise designed for ultraviolet, weathering and direct contact with water. The coating is applied in two coats with a nylon roller over surfaces primed with polyurethane or epoxy primers or fillers; working temperature is from +5 to +20 °C, and the surface must be at least 4 °C warmer than the dew point. At +15…+20 °C foot traffic is permitted after 3 days, full mechanical load after 7 days, full chemical load after 14 days.

Specifications

ManufacturerElakor — OOO “TEOKHIM-PROM”, Moscow Region
Typepolyurethane floors
Useproduction workshops, warehouses and logistics, car parks and ramps, retail and public premises, food and pharmaceutical, wet rooms, outdoor areas, chemically resistant, decorative
Basetwo-component polyurethane lightfast paint; acrylic-urethane prepolymers, organic solvents, pigments, functional additives
Colourcoloured (tintable); gloss at 60° 25-40% (semi-matt)
Packaging“A” + “B” = kit 18 kg + 3 kg = 21 kg
Application methodColoured paint-on coatings for floors, walls, structures, tanks; UV-protective topcoats; decorative coatings with chips, flakes; quartz-filled and anti-slip coatings. On surfaces primed with polyurethane or epoxy primers (or fillers). Paint-on coatings – 2 coats with a nylon roller (12 mm nap); also brushes, airless/air spraying. Relative air humidity not more than 80%; surface moisture not more than 4 wt%; surface 4°C or more above the dew point.
Application temperatureair and surface: from +5°C to +20°C; material: from +5°C to +20°C
Curingpot life at +20°C at least 40 min; drying to degree 3 at +20°C, relative air humidity 65% not more than 1 h; forced drying up to +80°C; drying between coats at +15…20°C – 16-12 h; after application at +15…20°C: foot traffic – 3 days, full mechanical load – 7 days, full chemical load – 14 days
Key propertiesmix viscosity VZ-4 20-25 s; solids content at least 54%; density 1.01-1.03 kg/l; service temperature range at relative air humidity up to 80% from -60°C to +100°C, at relative air humidity above 80% from -40°C to +80°C; film water absorption not more than 0.1%; film tensile strength at least 27 MPa; elongation at break at least 20%; impact strength (U-2M) direct 100 cm, reverse 50 cm; flexibility not more than 2 mm; lightfastness 7 (excellent) per ISO 9370-2017; Taber abrasion CS-10, 1000 g, 28 days – 24 mg; resistance to climatic factors 1 point (GOST 9.401 method 2); frost resistance at -60°C at least 75 cycles; fire hazard class KM1; Shore D at 28 days 73-75; gloss at 60° 25-40%; chemical resistance: water, salt and alkali solutions of any concentration, acid solutions up to 10-20%, oils and fats of all kinds, organic solvents, petrol, diesel fuel
Consumptionpaint-on coatings: 2 coats, 70-80 g/m² per coat; sealing coat of quartz-filled coatings: 1-2 coats, up to 600 g/m² per coat
Shelf life8 months in the manufacturer's original packaging; store and transport at temperatures from -30°C to +25°C

Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.

Other materials by ELAKOR