Elcon Zintech cold galvanising compound — one-component zinc primer
Zinc-rich epoxy ester primer for sacrificial protection of metal in soil and atmosphere; more than 1,440 h in a salt spray chamber without corrosion.

KhV-0278 primer-enamel makes it possible to paint steel structures and equipment without removing tightly adherent rust: it is enough to remove loose rust and degrease the surface. The material is one-component, based on synthetic resins, and works as a stand-alone coating or as a primer under a decorative topcoat; a stripe coat is applied to welds and edges. Painting is permitted from −20 °C to +40 °C, and the service life of the coating is up to 5 years.
| Manufacturer | Elcon — OOO “Elcon”, Novocheboksarsk |
|---|---|
| Type | primer-enamels |
| Use | steel structures, equipment |
| Base | one-component primer-enamel on synthetic resins; aromatic solvents |
| Colour | black, red-brown, white, blue, bright red, red, yellow, brown, dark brown, beige, grey, light grey, green; tinting to RAL K5 |
| Packaging | 25 kg |
| Application method | air spray (20–25 s), airless spray or brush (50–80 s); stripe coat on welds and edges; 2–3 coats with drying to “tack-free” 1–2 h; over tightly adherent rust after removal of loose rust, degreasing with Elcon R |
| Application temperature | from −20 °C to +40 °C (air and substrate); relative humidity not more than 80 %; surface 3 °C above the dew point |
| Drying | drying 2 h at (20±2) °C; complete drying 24 h; installation — not earlier than 3 days |
| Key properties | Non-volatile matter by weight: at least 40 %, Adhesion: not more than 2 points; impact strength at least 40 cm, Resistance to static exposure at 20 °C: water 72 h, 3 % NaCl 72 h, Coating service life: up to 5 years |
| Compatible materials | stand-alone coating or primer under a decorative topcoat |
| Shelf life | 24 months from the date of manufacture; storage from −30 °C to +40 °C |
| Standards | TU 2312-019-49222195-2016 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Zinc-rich epoxy ester primer for sacrificial protection of metal in soil and atmosphere; more than 1,440 h in a salt spray chamber without corrosion.
Silicone enamel for pipelines, chimneys, heating pipes and waste incineration furnaces heated up to +700 °C.
Colourless silicone varnish for metal and concrete up to +300 °C, dries at 150 °C; serves as the base of KO-813 silver enamel.
Silicone enamel for steel structures and reinforced concrete under short-term exposure to acids and mineralised groundwater.
Silicone enamel for steam pipelines, furnaces and steel structures up to +700 °C, as well as for painting concrete and brick in atmospheric conditions.
One-component cold galvanising compound for bridges, power line towers, oil and gas and port structures; applied in frost down to −20 °C.