Elcon
KO-828 Elcon — heat-resistant enamel for low-carbon steel parts
Silicone enamel for low-carbon steel parts over phosphated and non-phosphated surfaces, heating up to +700 °C.
Price on request
Elcon
Elcon Zintech cold galvanising compound — one-component zinc primer
The basic compound of the Zintech range: a one-component zinc-rich primer on modified epoxy ester resin with spherical and lamellar zinc. It provides sacrificial protection of ferrous metals in soil and atmosphere — steel structures, equipment, pipelines — and works on its own or as a primer; paired with Elcon AL topcoat enamel, the service life of the system according to climatic tests by NPO “Lakokraspokrytie” is 35 years. It is applied at temperatures from +5 °C to +30 °C.
Specifications
| Manufacturer | Elcon — OOO “Elcon”, Novocheboksarsk |
|---|---|
| Type | zinc-rich primers |
| Base | one-component zinc-rich primer on modified epoxy ester resin; spherical and lamellar zinc; aromatic solvents |
| Colour | grey |
| Packaging | 10 kg, 25 kg; 1 kg; aerosol 520 ml |
| Application method | air spray, roller, brush; several coats with intercoat drying to “tack-free” from 0.5 h; surface preparation St 3 (Zintech 60 and 96 — St 3 or Sa 2–Sa 2.5), degreasing; thinner Elcon R, o-xylene, toluene (not more than 10 %) |
| Application temperature | from +5 °C to +30 °C |
| Drying | to degree 3 — not more than 2 h at 20 °C; coating drying 1 h at (20±2) °C; full cure at least 24 h; installation — not earlier than 3 days |
| Key properties | Non-volatile matter by weight: at least 60 %, Density: 1.50–1.90 g/cm³, Adhesion: not more than 1 point |
| Compatible materials | stand-alone coating or primer under decorative and protective coatings; topcoat — Elcon AL |
| Shelf life | 10 and 25 kg — 18 months; 1 kg — 24 months; aerosol — 36 months; storage from −30 °C to +40 °C |
| Standards | TU 2312-018-49222195-2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Elcon
Elcon
KO-870 Elcon — heat-resistant enamel up to +700 °C for steel structures and concrete
One-component silicone enamel for steel structures and equipment up to +700 °C, also suitable for concrete, brick and reinforced concrete.
Price on request
Elcon
KO-8104 Elcon — heat-resistant enamel up to +700 °C for metal, concrete and brick
Silicone enamel for steam pipelines, furnaces and steel structures up to +700 °C, as well as for painting concrete and brick in atmospheric conditions.
Price on request
Elcon
KO-813 Elcon — silver heat-resistant enamel up to +500 °C, one- and two-component
Silver silicone enamel up to +500 °C for steel structures and equipment: two-component per GOST 11066-74 or one-component per TU.
Price on request
Elcon
KO-815 Elcon — heat-resistant silicone varnish up to +300 °C
Colourless silicone varnish for metal and concrete up to +300 °C, dries at 150 °C; serves as the base of KO-813 silver enamel.
Price on request
Elcon
Elcon Max Therm heat-resistant enamel — polyorganosiloxane enamel up to +1,200 °C
One-component polyorganosiloxane enamel for steel structures, pipelines and power equipment; the black version withstands up to +1,200 °C.
Price on request