Elcon
KO-815 Elcon — heat-resistant silicone varnish up to +300 °C
Colourless silicone varnish for metal and concrete up to +300 °C, dries at 150 °C; serves as the base of KO-813 silver enamel.
Price on request
Elcon
Elcon Max Therm heat-resistant enamel — polyorganosiloxane enamel up to +1,200 °C
The manufacturer’s flagship enamel on polyorganosiloxane resin for steel structures, pipelines, power equipment and concrete. The heat limit depends on the colour: black withstands up to +1,200 °C, other shades 700 °C, 600 °C or 400 °C. No priming is required, it can be applied at air temperatures from −30 °C, and the declared service life of the coating is up to 15 years; the manufacturer publishes a report on accelerated climatic tests by NII LKP “Lakokraspokrytie”.
Specifications
| Manufacturer | Elcon — OOO “Elcon”, Novocheboksarsk |
|---|---|
| Type | heat-resistant coatings |
| Base | one-component enamel on polyorganosiloxane resin; aromatic solvents |
| Colour | black (up to 1,200 °C), dark chocolate, graphite, gold, copper, silver, red-brown (up to 700 °C), green, white (up to 700 °C), anthracite (up to 600 °C), grey, light grey, blue, bright red, red, yellow, brown, light blue, beige, orange (up to 400 °C); tinting to RAL K5 |
| Packaging | 25 kg; 0.4 kg and 0.8 kg; aerosol 520 ml |
| Application method | air spray, roller, brush; intercoat drying 30 min; surface preparation St 3 or Sa 2–Sa 2.5, degreasing with Elcon R; thinner Elcon R, o-xylene, toluene (not more than 10 %); concrete — in three coats |
| Application temperature | from −30 °C to +40 °C; relative air humidity not more than 80 % |
| Drying | to degree 3 — not more than 2 h at (20±2) °C or 30 min at (150±2) °C; coating drying 15 min, final — at least 24 h; heat curing: 30 min at 150 °C, ramp-up to service temperature 3.5 °C/min, hold 1 h; transport and installation — not earlier than 3 days |
| Key properties | Heat resistance: from −60 °C to +1,200 °C (black); 700 °C, 600 °C or 400 °C depending on colour, Non-volatile matter by weight: 35–55 % (depending on colour), Impact strength (U-1A): at least 40 cm, Adhesion: not more than 1 point, Resistance to alternating heating to 600 °C and water: at least 5 cycles, Resistance to static exposure at 20 °C: water 100 h, petrol 72 h, industrial oil 72 h, Coating service life: up to 15 years |
| Compatible materials | no priming required |
| Shelf life | 25 kg — 24 months; 0.4 and 0.8 kg — 36 months; aerosol — 60 months; storage from −30 °C to +40 °C |
| Standards | TU 2312-237-05763441-98 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Elcon
Elcon
KO-828 Elcon — heat-resistant enamel for low-carbon steel parts
Silicone enamel for low-carbon steel parts over phosphated and non-phosphated surfaces, heating up to +700 °C.
Price on request
Elcon
KO-198 Elcon — weather-resistant silicone enamel for aggressive environments
Silicone enamel for steel structures and reinforced concrete under short-term exposure to acids and mineralised groundwater.
Price on request
Elcon
KO-85 Elcon — colourless heat-resistant silicone varnish up to +250 °C
Colourless silicone varnish for metal, concrete, brick and asbestos cement up to +250 °C; the base of KO-814 silver enamel.
Price on request
Elcon
KhV-0278 Elcon — anticorrosion primer-enamel over rust
One-component primer-enamel for steel structures and equipment, applied over tightly adherent rust at temperatures down to −20 °C.
Price on request
Elcon
KO-868 Elcon — heat-resistant enamel for equipment exposed to moisture and oil products
Silicone enamel for equipment, oil and gas pipelines and chimneys under high humidity and heating up to +700 °C.
Price on request