Elcon
KO-174 Elcon — silicone facade enamel for concrete and metal
Vapour-permeable silicone enamel for facades, concrete, equipment and steel structures; the grey-silver version withstands 400 °C.
Price on request
Elcon
KO-868 Elcon — heat-resistant enamel for equipment exposed to moisture and oil products
Among Elcon’s silicone enamels, KO-868 is aimed at severe conditions: metal equipment at high humidity and temperature, oil and gas pipelines, chimneys, contact with petroleum products and mineral oils in the range from −60 °C to +700 °C. The coating withstands at least 48 h of static exposure to water, petrol and industrial oil and at least 3 cycles of alternating heating to 600 °C and water. No primer is needed; packaging is 25 kg.
Specifications
| Manufacturer | Elcon — OOO “Elcon”, Novocheboksarsk |
|---|---|
| Type | heat-resistant coatings |
| Base | one-component enamel on modified silicone resin with a solution of pentaphthalic resin; organic solvents |
| Colour | black (up to 700 °C), silver-grey (up to 650 °C), red-brown (up to 500 °C), white, grey, blue, bright red, red, yellow, brown, light blue, light grey, green (up to 400 °C); tinting to RAL K5 |
| Packaging | 25 kg |
| Application method | air spray, roller, brush; 2–3 cross coats with intercoat drying to “tack-free” 0.5–2 h; surface preparation St 3 or Sa 2–Sa 2.5 and degreasing; thinner Elcon R, o-xylene, toluene (not more than 10 %) |
| Application temperature | from −30 °C to +40 °C; relative air humidity not more than 80 % |
| Drying | to degree 3 — not more than 2 h at (20±2) °C or 0.5 h at (150±2) °C; coating drying 30 min at (20±2) °C, final — at least 24 h; full cure on heating in service; transport and installation — not earlier than 3 days |
| Key properties | Heat resistance: from −60 °C to +700 °C (black — 700 °C, silver-grey — 650 °C, red-brown — 500 °C, other colours — 400 °C), Non-volatile matter by weight: 35–45 %, Hardness by TML (pendulum A): at least 0.18 relative units, Impact strength (U-1A): at least 40 cm, Adhesion: not more than 1 point, Resistance to alternating heating to 600 °C and water: at least 3 cycles, Resistance to static exposure at 20 °C: water 48 h, petrol 48 h, industrial oil 48 h |
| Compatible materials | no priming required |
| Shelf life | 24 months from the date of manufacture; storage from −30 °C to +40 °C |
| Standards | TU 2312-010-49222195-2012 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Elcon
Elcon
Elcon Max Therm heat-resistant enamel — polyorganosiloxane enamel up to +1,200 °C
One-component polyorganosiloxane enamel for steel structures, pipelines and power equipment; the black version withstands up to +1,200 °C.
Price on request
Elcon
Elcon Zintech cold galvanising compound — one-component zinc primer
Zinc-rich epoxy ester primer for sacrificial protection of metal in soil and atmosphere; more than 1,440 h in a salt spray chamber without corrosion.
Price on request
Elcon
OS-12-03 Elcon — organosilicate composition up to +100, +150 or +300 °C
Organosilicate primer-enamel for metal, concrete, brick and facades in three versions: up to +100 °C, up to +150 °C and Elcon up to +300 °C.
Price on request
Elcon
KO-814 Elcon — silver enamel up to +400 °C in two versions
Silver silicone enamel up to +400 °C for steel structures and equipment: on KO-85 varnish with aluminium powder, or one-component.
Price on request
Elcon
KO-828 Elcon — heat-resistant enamel for low-carbon steel parts
Silicone enamel for low-carbon steel parts over phosphated and non-phosphated surfaces, heating up to +700 °C.
Price on request