Elcon
KO-198 Elcon — weather-resistant silicone enamel for aggressive environments
Silicone enamel for steel structures and reinforced concrete under short-term exposure to acids and mineralised groundwater.
Price on request
Elcon
KO-814 Elcon — silver enamel up to +400 °C in two versions
A silver enamel for steel structures and equipment with a working range from −60 °C to +400 °C. The two-component version per GOST 11066-74 is prepared from KO-85 varnish and aluminium powder in a ratio of 100 : 5 (kit — 20 kg of varnish and 1 kg of PAP-2 powder), and the mixture is usable for 8 h; the one-component version per TU 2312-010-49222195-2012 on modified silicone resins and glyphthalic varnish is supplied in 25 kg containers. No priming is required.
Specifications
| Manufacturer | Elcon — OOO “Elcon”, Novocheboksarsk |
|---|---|
| Type | heat-resistant coatings |
| Use | steel structures, equipment |
| Base | two versions: two-component per GOST 11066-74 (KO-85 varnish + aluminium powder, 100 : 5) and one-component per TU (modified silicone resins and glyphthalic varnish) |
| Colour | silver |
| Packaging | two-component: KO-85 varnish 20 kg + PAP-2 powder 1 kg; one-component: 25 kg |
| Application method | air spray (working viscosity 12–17 s); 2–3 cross coats with drying to “tack-free” 0.5–2 h; preparation St 3 or Sa 2–Sa 2.5, degreasing; use the two-component enamel within 8 h after mixing |
| Application temperature | from −30 °C to +40 °C (air and substrate); relative humidity not more than 80 %; surface at least 3 °C above the dew point |
| Drying | to degree 3 — not more than 2 h at (20±2) °C; final drying at least 24 h; full cure on heating; installation — not earlier than 3 days |
| Key properties | Heat resistance: from −60 °C to +400 °C, Two-component: impact strength after 3 h at 330–350 °C — 50 cm; water and petrol — 24 h, One-component: non-volatile matter 40±5 %; impact at least 40 cm; adhesion not more than 1 point; resistance at 400 °C at least 3 h; water, petrol, oil — 48 h |
| Compatible materials | no priming required |
| Shelf life | one-component — 24 months; KO-85 varnish for the two-component version — 36 months; storage from −30 °C to +40 °C |
| Standards | GOST 11066-74 (two-component); TU 2312-010-49222195-2012 (one-component) |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Other materials by Elcon
Elcon
KO-811 Elcon — heat-resistant enamel up to +400 °C per GOST 23122-78
Silicone enamel per GOST 23122-78 for steel, aluminium and titanium surfaces, working from −60 °C to +400 °C.
Price on request
Elcon
KO-8101 Elcon — heat-resistant enamel up to +700 °C for pipelines and the power industry
Silicone enamel for oil, steam and gas pipelines, chimneys and equipment; applied without primer, the black version withstands up to +700 °C.
Price on request
Elcon
KO-174 Elcon — silicone facade enamel for concrete and metal
Vapour-permeable silicone enamel for facades, concrete, equipment and steel structures; the grey-silver version withstands 400 °C.
Price on request
Elcon
Elcon Zintech 60 cold galvanising compound — fast-drying zinc primer
Fast-drying zinc-rich primer for steel structures, bridges, oil and gas and power equipment; applied down to −15 °C.
Price on request
Elcon
Elcon AL anticorrosion weather-resistant enamel — topcoat with flake aluminium
Silver barrier enamel with flake aluminium for steel structures and equipment; topcoat over Elcon Zintech zinc primer.
Price on request