Elcon Zintech 60 is a fast-drying one-component primer for metal on modified epoxy ester resin with spherical zinc. It is used on steel structures, bridges, oil and gas and power equipment as a stand-alone coating or as a primer under topcoats. Application is possible from −15 °C to +30 °C; a coat dries to degree 3 in not more than 1 h at 20 °C, and at sub-zero temperatures the intercoat interval is increased 2–3 times.
| Manufacturer | Elcon — OOO “Elcon”, Novocheboksarsk |
|---|---|
| Type | zinc-rich primers |
| Use | steel structures, bridges, equipment, oil and gas, power industry |
| Base | one-component zinc-rich primer on modified epoxy ester resin; spherical zinc; aromatic solvents |
| Colour | grey |
| Packaging | 10 kg, 25 kg; 0.7 kg |
| Application method | air spray, roller, brush; several coats with intercoat drying to “tack-free” from 0.5 h; surface preparation St 3 (Zintech 60 and 96 — St 3 or Sa 2–Sa 2.5), degreasing; thinner Elcon R, o-xylene (not more than 10 %) |
| Application temperature | from −15 °C to +30 °C; relative humidity not more than 80 % |
| Drying | to degree 3 — not more than 1 h at 20 °C; at sub-zero temperatures the intercoat interval is 2–3 times longer |
| Key properties | Non-volatile matter by weight: at least 65 %, Density: 1.45–1.80 g/cm³, Adhesion: not more than 1 point, Resistance to static exposure at 20 °C: water 100 h, 3 % NaCl 100 h |
| Compatible materials | stand-alone coating or primer under topcoats |
| Shelf life | 10 and 25 kg — 18 months; 0.7 kg — 24 months; storage from −30 °C to +40 °C |
| Standards | TU 2312-018-49222195-2017 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
One-component primer-enamel for concrete walls, reinforced concrete structures and facades in mildly and moderately aggressive environments; stays vapour-permeable.
Silicone enamel for steam pipelines, furnaces and steel structures up to +700 °C, as well as for painting concrete and brick in atmospheric conditions.
Silicone enamel for low-carbon steel parts over phosphated and non-phosphated surfaces, heating up to +700 °C.
Silicone enamel for equipment, oil and gas pipelines and chimneys under high humidity and heating up to +700 °C.
Organosilicate composition for the outer surface of heating network pipelines in tunnels, collectors and crawl spaces, up to +150 or +300 °C.
One-component cold galvanising compound for bridges, power line towers, oil and gas and port structures; applied in frost down to −20 °C.
