YARFAST®-0111B primer-enamel — thixotropic, applied in a single coat
Thixotropic quick-drying primer-enamel for steel structures: does not sag in a thick coat and is applied in a single coat by airless spray.

EP-057 Khimtek is a two-pack epoxy sacrificial primer to TU 6-10-1117-85 that forms a matt, rough grey film. It is used on large steel structures in the atmosphere and at high humidity, in rail, sea and river transport and on agricultural machinery, as well as on stainless steel and non-ferrous metals. In a system it is the primer of a multi-coat coating under enamels; it dries to degree 3 in 1 h at 20 °C, and hot drying at 120 °C is permitted.
| Manufacturer | Khimtek — OOO PO “Khimtek”, Yaroslavl |
|---|---|
| Type | zinc-rich primers |
| Use | steel structures |
| Base | Two-pack epoxy sacrificial primer: epoxy resin solution with pigments, fillers and additives + hardener |
| Colour | grey |
| Application method | brush, air or airless spray; thinner RP, cleaning with R-4 |
| Drying | standing time 30 min after adding the hardener; to degree 3 — 1 h at (20±2) °C; to degree 7 — 0.5 h at (120±5) °C, 24 h at (20±2) °C; drying between coats 1–2 h |
| Compatible materials | primer in a multi-coat coating system with enamels |
| Shelf life | 6 months from the date of manufacture; storage from −30 to +30 °C |
| Standards | TU 6-10-1117-85 |
Data from the manufacturer’s technical data sheet. The coating system, number of coats and quantity are selected for your project on request.
Thixotropic quick-drying primer-enamel for steel structures: does not sag in a thick coat and is applied in a single coat by airless spray.
Zinc-rich epoxy primer for steel structures and products operating in a corrosive environment at elevated temperatures.
Two-component epoxy primer with zinc powder for steel structures; the pot life of the mixture with the hardener is 12 h.
Chemical-resistant epoxy enamel for metal surfaces exposed to hot alkalis, over primed and unprimed metal.
One-component zinc-rich epoxy primer for steel structures, thinned with xylene or solvent naphtha up to 5 %.
Enamel for railway wagons, tank cars, equipment and structures in acid, alkali, salt and aggressive gas media, applied over KhS-059 or KhS-010 primer.